UPM Institutional Repository

Optimization of micro-end milling process parameters of titanium alloy using non-dominated sorting genetic algorithm


Citation

Golshan, Abolfazl (2013) Optimization of micro-end milling process parameters of titanium alloy using non-dominated sorting genetic algorithm. Masters thesis, Universiti Putra Malaysia.

Abstract

The selection of optimal cutting parameters has always presented a critical quality concern in the micromachining process. This study examines the effects of three process parameters which are spindle speed, feed rate and depth of cut on the process outputs. The outputs are the surface area roughness and burr formation in micro-end milling of Ti-6Al-4V titanium alloy. Response surface methodology was utilized to develop mathematical models of the process outputs. In addition, analysis of variance and confirmation runs were employed to verify the precision of the mathematical models. Finally, non-dominated sorting genetic algorithm-II as evolutionary optimization approach was used for multi-objective optimization of the micro-end milling process. The optimization results demonstrate the high performance of this method to obtain the Pareto optimal set of solutions in the micro-end milling process. With the optimal parameter sets, an operator can select a suitable combination of variables to obtain a better surface finish or lower burr formation. Optimal machining parameters were the spindle speed of 40000 rpm, the feed rate of 61-75 mm/min, and the depth of cut of 86-92 μm.


Download File

[img]
Preview
PDF
FK 2013 49R.pdf

Download (1MB) | Preview

Additional Metadata

Item Type: Thesis (Masters)
Subject: Titanium
Subject: Genetic algorithms
Call Number: FK 2013 49
Chairman Supervisor: B.T. Hang Tuah Bin Baharudin, PhD
Divisions: Faculty of Engineering
Depositing User: Haridan Mohd Jais
Date Deposited: 22 Jul 2016 02:12
Last Modified: 22 Jul 2016 02:12
URI: http://psasir.upm.edu.my/id/eprint/47576
Statistic Details: View Download Statistic

Actions (login required)

View Item View Item