Twist springback measurement of autonomous underwater vehicle propeller blade based on profile deviation

Citation

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin and M. Tandoor, Khaleed Hussain and Abdul Aziz, Nuraini (2013) Twist springback measurement of autonomous underwater vehicle propeller blade based on profile deviation. American Journal of Applied Sciences, 10 (5). pp. 515-524. ISSN 1546-9239; ESSN: 1554-3641

Abstract

Geometrical defects that are attributable to springback are among the major defects induced by the sheet metal forming process. Such defects are critical for sections with varying thickness, such as Autonomous Underwater Vehicle (AUV) propeller blades. In this study, the springback in the twist-bending of an AA6061 propeller blade was quantified by comparing the targeted and manufactured profiles obtained using the commercial three-dimensional surface measurement technique. The results show that the twist springback becomes larger as the twist angle increases. Similarly, the twist springback increases with increasing deformation ratio.

Download File

PDF
ajassp.2013.515.524.pdf
Restricted to Repository staff only
Download (348kB)

Additional Metadata

Item Type:	Article
Divisions:	Faculty of Engineering
DOI Number:	https://doi.org/10.3844/ajassp.2013.515.524
Publisher:	Science Publications
Keywords:	Twist springback; Propeller blade; Cold forging; Profile deviation
Depositing User:	Nabilah Mustapa
Date Deposited:	05 May 2015 01:08
Last Modified:	04 Dec 2015 03:03
Altmetrics:	http://www.altmetric.com/details.php?domain=psasir.upm.edu.my&doi=10.3844/ajassp.2013.515.524
URI:	http://psasir.upm.edu.my/id/eprint/28665
Statistic Details:	View Download Statistic

Actions (login required)

View Item