Citation
Baby, Rabia
(2022)
Preparation of activated carbon nanomaterial from palm oil kernel shell for removal of heavy metal ions.
Doctoral thesis, Universiti Putra Malaysia.
Abstract
Environmental pollution is greatly caused by industrialization as well as human beings
and water contamination is one of the major hazards for living. Many kinds of
contaminants have been studied such as bacteria, viruses, organic molecules, dyes and
heavy metal ions, such as Cr6+, Pb2+, Cd2+, Zn2+, As3+, Cu2+and Hg2+, etc. Among all these
contaminants, heavy metal ions are non-biodegradable in nature and can accumulate in
the human body continuously over time, which results in severe adverse effects like a
breakdown of the nervous system, skin diseases, liver damage, kidney failure, anemia,
hepatitis, ulcers and carcinogenic. The key objectives of this study are to prepare the PKS
powder, the functionalization of the PKS powder, preparation of activated carbon
nanomaterial (ACN) and functionalized ACN and application for the treatment of heavy
metal-contaminated water. In this study, four heavy metal ions namely chromium (Cr6+),
lead (Pb2+), cadmium (Cd2+) and zinc (Zn2+) were selected as the water contaminants.
Furthermore, four different bio-sorbents were prepared namely PKS powder,
functionalized PKS (PKS-Sulfo), activated carbon (AC) and functionalized activated
carbon (FAC). All of these adsorbents were successfully applied for the treatment of
heavy metal-contaminated water. They showed good adsorption affinities for the Cr6+,
Pb2+, Cd2+ and Zn2+ heavy metal ions. Adsorption of Cr6+ and Pb2+ was determined to be
maximum almost reach to 99% in case of each adsorbent. The Cd2+ whose adsorption
was found to be 80-85% , followed by 70-75% of Zn2+ ions adsorption in all four
applied adsorbents.Two isotherm models namely Freundlich and Langmuir and three
kinetics models namely the pseudo-first-order, pseudo-second-order and Parabolic
diffusion were applied for the determinations of kinetic interactions between the
adsorbents; ( PKS, PKS-Sulfo, AC and FAC ) and the adsorbates; (Cr6+, Pb2+, Cd2+ and
Zn2+ ). The adsorption followed Pseudo Second Order in all cases of the adsorbents.
Langmuir adsorption isotherm was found to be followed in case of PKS-Sulfo, and only
zinc adsorption in PKS,apart from this Aacivated carbon (AC, Functionalzied Activated
Carbon (FAC) as well as PKS were found to follow Freundlich isotherm model. PKSSulfo
The adsorption efficiency among all four adsorbents was found to be in the order
of FAC> AC>PKS-Sulfo>PKS. This is a greener approach that can serve the dual
Download File
Additional Metadata
Actions (login required)
|
View Item |