Browse by Thesis Advisor

Abd Rahman, Mohd Amiruddin (2016) Kernel and multi-class classifiers for multi-floor wlan localisation. Doctoral thesis, Universiti Putra Malaysia.

Abdalhadi, Daw Mohammad (2018) Fabrication and characteristics of oil palm fibre- reinforced polylactic acid composite filled with iron oxide for microwave application. Doctoral thesis, Universiti Putra Malaysia.

Ahmad, Ahmad Fahad (2015) Preparation and characterization of oil palm empty fruit fibre polycaprolactone nickel zinc-ferrite and nickel oxide composites for microwave shielding. PhD thesis, Universiti Putra Malaysia.

Ansarudin, Farizah (2012) Insulated monopole sensor for determination of moisture content in hevea rubber latex. Masters thesis, Universiti Putra Malaysia.

Anuar, Nor Azrina (2018) UV-VIS spectroscopy characteristic of crude palm oil at 55ºC - 120ºC. Masters thesis, Universiti Putra Malaysia.

Balami, Sunday Dauda (2017) Development of low cost, lossy and low dielectric constant OPEFB-HDPE composite material for microwave application. Masters thesis, Universiti Putra Malaysia.

Esa, Fahmiruddin (2015) Microstrip technique and modeling for determination of microwave properties of Ni-Zn ferrite. Doctoral thesis, Universiti Putra Malaysia.

Fadhil, Omar Ayad (2014) Moisture content detection in anchovy sauce using microstrip sensor. Masters thesis, Universiti Putra Malaysia.

Ibrahim, Radzi Rahman (2017) Preparation and characterization of oil palm fiber-reinforced PCL composites for reduction of electromagnetic interference. Masters thesis, Universiti Putra Malaysia.

Jawad, Mohammed Abdulkareem (2014) Microwave characterization technique of mortar, concrete reinforcement wire mesh, and mortar filled with pvc tubes. Masters thesis, Universiti Putra Malaysia.

Khamis, Ahmad (2019) Development of Epoxy-OPEFB composites for shielding applications. Masters thesis, Universiti Putra Malaysia.

Khamis, Ahmad (2022) High shielding effect in x-band microwave frequencies of Ferrite-OPEFB-PTFE nanocomposites. Doctoral thesis, Universiti Putra Malaysia.

Meli, Abubakar Dantani (2019) Characterisation of lossy low dielectric constant soda lime silica-high density polyethylene composites for microwave application. Masters thesis, Universiti Putra Malaysia.

Mensah, Ebenezer Ekow (2019) Synthesis and electromagnetic characterization of polycaprolactone filled with hematite and OPEFB fiber nanocomposite. Doctoral thesis, Universiti Putra Malaysia.

Mohamed, Tity Nazleen (2017) Open-ended coaxial technique for detection of masses and microcalcifications in breast phantoms. Masters thesis, Universiti Putra Malaysia.

Muhammad Hafizi, Mardiah Hafizah (2015) A microwave dipole technique for determination of moisture content of hevea rubber latex (Hevea brasiliensis Mull. Arg.). Masters thesis, Universiti Putra Malaysia.

Mustapa Zahari, Rahimah (2013) Critical analysis of rectangular waveguide for determination of moisture content in hevea rubber latex. Masters thesis, Universiti Putra Malaysia.

Ng, Tze Wei (2014) Convergence and error study of different basis and testing functions in the method of moments applied to electromagnetic wave scattering from dielectric objects. Masters thesis, Universiti Putra Malaysia.

Salih, Ethar Yahya (2014) Microwave characterization of zinc/aluminium and magnesium/aluminium layered double hydroxides filled with polyvinyl chloride composites. Masters thesis, Universiti Putra Malaysia.

Suhaime, Noradira (2018) Open-ended coaxial sensor for determination of moisture content, soluble solid content, pH and dielectric properties of Chok Anan mango. Masters thesis, Universiti Putra Malaysia.

Yahaya, Nor Zakiah (2013) Development of simple rectangular microstrip sensor for determining moisture content of hevea rubber latex. PhD thesis, Universiti Putra Malaysia.