Browse by Subject

Ab. Rashdi, Abdalla A. (2000) Finite Element Evaluation of Elasto-Plastic Residual Stresses around Coldworked Fastener Holes. Masters thesis, Universiti Putra Malaysia.

Abdul Aziz, Nuraini (2000) Finite Element Analysis of Elastomeric Push Fit Spigot and Socket Steel Pipe Joint. Masters thesis, Universiti Putra Malaysia.

Abdulmawlla, Mohamed A. (2010) Finite Element Analysis and Optimization of Closed Die Forging Process for Aluminium Metal Matrix Composites. PhD thesis, Universiti Putra Malaysia.

Ahmad, Juraidah (2001) Diametrical and Axial Indirect Tensile Testing Using H-Ometer on a Weak Rock Model and Its Finite Element Simulation. Masters thesis, Universiti Putra Malaysia.

Isham, Nur Hazwani (2021) Buckling and post-buckling of steel box section using finite element method. Masters thesis, Universiti Putra Malaysia.

Jalaluddin, Mai Nursherida (2017) Development of a one-year-old asian dummy model for finite element prediction of injury in automotive crash. Doctoral thesis, Universiti Putra Malaysia.

Krishna, Shreeram (2004) Prediction of structural response of distressed bridge using finite element method. Masters thesis, Universiti Putra Malaysia.

Mazlan, Shahan (2020) Optimization of stiffened panel fatigue life by using finite element analysis. Doctoral thesis, Universiti Putra Malaysia.

Md. Noh, Mohammad Soffi (2006) Nonlinear finite element analysis of integral bridge including foundation soil interaction. Masters thesis, Universiti Putra Malaysia.

Mohd Yusoff, Syamimi (2022) Finite element modelling of bilayer iron powder compaction and evaluation on its relative density distribution using imaging technique. Doctoral thesis, Universiti Putra Malaysia.

Na'mi, Saleem (2006) Finite Element Analysis Of Hydraulic Bulging Of Metal Tubes. Masters thesis, Universiti Putra Malaysia.

Rahman, Mahathir (2017) Bus superstructure rollover analysis using finite element method. Masters thesis, Universiti Putra Malaysia.

Raj Arora, Prithvi and Tan, Jeffrey Meng Lee and Barnard, Christian and Asrar, Waqar Finite element analysis of residual stresses during cold working. In: Persidangan Kebangsaan Penyelidikan & Pembangunan IPTA 2001 (25-26 Oktober 2001) hosted in Universiti Kebangsaan Malaysia, Bangi, Selangor, 25-26 Oktober 2001, Universiti Kebangsaan Malaysia, Bangi, Selangor. .

Talebi, Hossein (2006) Finite Element Modeling Of Ballistic Penetration into Fabric Armor. Masters thesis, Universiti Putra Malaysia.

Thanoon, Waleed Abdulmalik and Jaafar, Mohd Saleh and Chong, Kau Ping and Trikha, D. N. (2001) Analysis of distressed reinforced concentrate bridges. In: Persidangan Kebangsaan Penyelidikan & Pembangunan IPTA 2001 (25-26 Oktober 2001) hosted in Universiti Kebangsaan Malaysia, Bangi, Selangor, 25-26 Oktober 2001, Universiti Kebangsaan Malaysia, Bangi, Selangor. (pp. 543-550).

Wong, Choon Yap (2009) Finite Element Analysis of a Portal Frame Subjected to Concentrated Impulse Loading. Masters thesis, Universiti Putra Malaysia.

Zulkifli, Nurazwin (2022) Modelling of puncture responses in papaya using finite element analysis. Doctoral thesis, Universiti Putra Malaysia.