Browse by Journal Title

Sadrolhosseini, Amir Reza and Muhammad Noor, Ahmad Shukri and Abdi, Mahnaz M. and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir and Al-Qazwini, Yusser (2014) Application of conducting polymer layer for measurement of Ag nanoparticle concentration using surface plasmon resonance. Polymer-Plastics Technology and Engineering, 53 (5). pp. 520-525. ISSN 0360-2559; ESSN: 1525-6111

Shukor, Faseha and Hassan, Azman and Hasan, Mahbub and Islam, Md. Saiful and Mokhtar, Munirah (2014) PLA/Kenaf/APP biocomposites: effect of alkali treatment and ammonium polyphosphate (APP) on dynamic mechanical and morphological properties. Polymer-Plastics Technology and Engineering, 53 (8). pp. 760-766. ISSN 0360-2559; ESSN: 1525-6111

Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Abral, Hairul and Putra, Hendri (2013) Effect of Alkalization on Mechanical Propertiesof Water Hyacinth Fibers-Unsaturated Polyester composites. Polymer-Plastics Technology and Engineering, 52 (5). pp. 446-451. ISSN 0360-2559

Ahmad Saffian, Harmaen and Abdan, Khalina and Abd Rahman, Mohd Faizal and Mohammad Jawaid, (2013) Effect of triacetin on tensile properties of oil palm empty fruit bunch fiber-reinforced polylactic acid composites. Polymer-Plastics Technology and Engineering, 52 (4). pp. 400-406. ISSN 0360-2559; ESSN: 1525-6111

Asyadi, Fahmi and Jawaid, Mohammad and Hassan, Azman and Wahit, M. U. (2013) Mechanical properties of mica-filled polycarbonate/poly (acrylonitrile-butadiene-styrene) composites. Polymer-Plastics Technology and Engineering, 52 (7). pp. 727-736. ISSN 0360-2559; ESSN: 1525-6111

Salit, Mohd Sapuan and Abral, Hairul and Gafar, M. Fitra and Andriyanto, Heri and Ishak, Mohamad Ridzwan and Evitayani, and Ilhamdi, (2012) Alkali treatment of screw pine (pandanus odoratissimus) fibres and its effect on unsaturated polyester composite. Polymer-Plastics Technology and Engineering, 51 (1). pp. 12-18. ISSN 0360-2559

Salit, Mohd Sapuan and Abrar, Hairul and Andriyanto, Heri and Samera, Rendi and Ishak, Mohamad Ridzwan (2012) Mechanical Properties of Screw Pine (Pandanus Odoratissimus) Fibers-Unsaturated Polyester Composites. Polymer-Plastics Technology and Engineering, 51 (5). pp. 500-506. ISSN 0360-2559

Zainudin, Edi Syams and Abdan, Khalina and Salit, Mohd Sapuan and Aji, Isuwa Suleiman and Mohd Dahlan, Khairul Zaman (2012) Study of Hybridized Kenaf/Palf- Reinforced Hdpe Composites by Dynamic Mechanical Analysis. Polymer-Plastics Technology and Engineering, 51 (21). pp. 146-153. ISSN 0360-2559

Ali, Aidy and Radeef, Zainab Shakir and Abdan, Khalina and Salit, Mohd Sapuan (2011) Development of anti-ballistic board from ramie fiber. Polymer-Plastics Technology and Engineering, 50 (6). pp. 622-634. ISSN 0360-2559; ESSN: 1525-6111

Ibraheem, Sameer Adnan and Ali, Aidy and Abdan, Khalina (2011) Development of green insulation boards from kenaf fibres and polyurethane. Polymer-Plastics Technology and Engineering, 50 (6). pp. 613-621. ISSN 0360-2559; ESSN: 1525-6111

Abdullah, Abdul Hakim and Abdan, Khalina and Ali, Aidy (2011) Effects of fiber volume fraction on unidirectional kenaf/epoxy composites: the transition region. Polymer-Plastics Technology and Engineering, 50 (13). pp. 1362-1366. ISSN 0360-2559; ESSN: 1525-6111

Abd. Rahman, Mohamed and Salit, Mohd Sapuan and Mridha, Shahjahan and Abdan, Khalina (2010) Effects of simple abrasive combing and pretreatments on the properties of pineapple leaf fibers (PALF) and PALF-vinyl ester composite adhesion. Polymer-Plastics Technology and Engineering, 49 (10). pp. 972-978. ISSN 0360-2559; ESSN: 1525-6111

Ibrahim, Nor Azowa and Chieng, Buong Woei and Wan Yunus, Wan Md. Zin (2010) Morphology, thermal and mechanical properties of biodegradable poly(butylene succinate)/poly(butylene adipate-co-terephthalate)/clay nanocomposites. Polymer-Plastics Technology and Engineering, 49 (15). pp. 1571-1580. ISSN 0360-2559; ESSN: 1525-6111

Zainal Abidin, Anis Sakinah and Ratnam, Chantara Thevy and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw (2009) Effect of mixing conditions on the tensile properties of ethylene vinyl acetate/waste tire dust (EVA/WTD) blend. Polymer-Plastics Technology and Engineering, 48 (11). pp. 1139-1142. ISSN 0360-2559; ESSN: 1525-6111

Zainudin, Edi Syams and Salit, Mohd Sapuan and Abdan, Khalina and Tengku Muda Mohamed, Mahmud (2009) Mechanical properties of compression molded banana pseudo-stem filled unplasticized polyvinyl chloride (UPVC) Composites. Polymer-Plastics Technology and Engineering, 48 (1). pp. 97-101. ISSN 0360-2559

Khalid , M. and Ratnam , Chantara Thevy and Abdullah, Luqman Chuah and Ali , Salmiaton and Choong, Thomas Shean Yaw and Jalaludin, H. (2009) Thermal and dynamic mechanical behavior of cellulose- and Oil Palm Empty Fruit Bunch (OPEFB)-filled polypropylene biocomposites. Polymer-Plastics Technology and Engineering, 48 (12). pp. 1244-1251. ISSN 0360-2559

Syaubari, and Mustapha, Saari and Chuah, Teong Guan and Ghazali, Zulkafli and Mat, Ishak and Salit, Mohd Sapuan (2008) Preparation of Conjugated p-Aminobenzamidine on Thermosensitive Poly(NIPAM) by Irradiation Grafted Process. Polymer-Plastics Technology and Engineering, 47 (7). pp. 692-696. ISSN 0360-2559

Rezaei, Fateme and Yunus, Robiah and Ibrahim, Nor Azowa and Mahdi, Elsadig (2008) Development of Short-Carbon-Fiber-Reinforced Polypropylene Composite for Car Bonnet. Polymer-Plastics Technology and Engineering, 47 (4). pp. 351-357. ISSN 0360-2559

Leman, Zulkiflle and Salit, Mohd Sapuan and Mohamed Zawawi, Mohamed Azwan and Megat Ahmad, Megat Mohamad Hamdan and Maleque, Md Abdul (2008) The Effect of Environmental Treatments on Fiber Surface Properties and Tensile Strength of Sugar Palm Fiber Reinforced Epoxy Composites. Polymer-Plastics Technology and Engineering, 47 (6). 606- 612. ISSN 0360-2559

Hamed, Abdalla F. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Sahari, Barkawi (2008) Internal pressure carrying capacity for different loading modes of filament-wound pipes from glass fiber-reinforced epoxy composites. Polymer-Plastics Technology and Engineering, 47 (8). pp. 802-808. ISSN 0360-2559; ESSN: 1525-6111

Hamed, Abdalla F. and Megat Ahmad, Megat Mohamad Hamdan and Salit, Mohd Sapuan and Sahari, Barkawi (2008) Theoretical analysis for calculation of the through thickness effective constants for orthotropic thick filament wound tubes. Polymer-Plastics Technology and Engineering, 47 (10). pp. 1008-1015. ISSN 0360-2559; ESSN: 1525-6111