Browse by Journal Title
![]() | Up a level |
Number of items: 10.
A
Ali, Mohammed Sabah and Mohamed Ariff, Azmah Hanim and S.M, Tahir and Jaafar, Che Nor Aiza and Mazlan, Norkhairunnisa and Matori, Khamirul Amin
(2017)
The effect of nano-copper additives on the porosity, mechanical properties, and microstructure of alumina ceramics using commercial rice husk ash as a pore former.
Journal of the Australian Ceramic Society, 53 (2).
963 - 974.
ISSN 2510-1560; ESSN: 2510-1579
Azis, Rabaah Syahidah and Holland, Diane and Smith, Mark E. and Howes, Andrew and Hashim, Mansor and Zakaria, Azmi and Hassan, Jumiah and Mohd Saiden, Norlaily and Mohd Zawawi, Mohd Khairul Ikhwan
(2013)
DTA/TG, XRD and 27Al MAS NMR of yttrium aluminium garnet, Y3al5o12 by sol-gel synthesis.
Journal of the Australian Ceramic Society, 49 (2).
pp. 74-80.
ISSN 0004-881X
C
Che Engku Ali, Engku Abd Ghapur and Matori, Khamirul Amin and Saion, Elias and Abd. Aziz, Sidek and Mohd Zaid, Mohd Hafiz and Alibe, Ibrahim Mustapha
(2019)
Effect of sintering temperatures on structural and optical properties of ZnO-Zn2SiO4 composite prepared by using amorphous SiO2 nanoparticles.
Journal of the Australian Ceramic Society, 55 (1).
pp. 115-122.
ISSN 2510-1560; ESSN: 2510-1579
I
Ismail, Ismayadi and Abdullah, Abdul Halim and Abdul Rahim @ Arifin, Azdiya Suhada and Ibrahim, Idza Riati and Shafiee, Farah Nabilah and Azis, Raba’ah Syahidah
(2019)
Phase, morphological, and magnetic properties of iron oxide nanoparticles extracted from mill scale waste and its surface modification with CTAB surfactant.
Journal of the Australian Ceramic Society, 56 (2).
pp. 729-743.
ISSN 2510-1560; ESSN: 2510-1579
M
Mustaffa, Muhammad Syazwan and Azis, Raba'ah Syahidah and Hashim, M. and Ismail, Ismayadi and Kanagesan, Samikannu and Abdullah, Nor Hapishah
(2017)
Co–Ti- and Mn–Ti-substituted barium ferrite for electromagnetic property tuning and enhanced microwave absorption synthesized via mechanical alloying.
Journal of the Australian Ceramic Society, 53 (2).
465 - 474.
ISSN 2510-1560; ESSN: 2510-1579
Mokkandi, Purusothaman and Jayamani, Manivannan and Sekarbabu, Balakiruthiha and Kadambarajan, Jeya Prakash and Nagarajan, Rajini and Hameed Sultan, Mohamed Thariq and Shanmugavel, Rajesh
(2017)
Machinability performance of Al–NiTi and Al–NiTi–nano SiC composites with parametric optimization using GSA.
Journal of the Australian Ceramic Society, 53 (2).
599 - 609.
ISSN 2510-1560; ESSN: 2510-1579
Mohamad Aznan, M. N. and Mohamed Ariff, Azmah Hanim and Mohd Tahir, Suraya and Mazlan, Norkhairunnisa and As'arry, Azizan
(2017)
Properties of alumina with RHA-reinforced aluminum composite using different sintering profile.
Journal of the Australian Ceramic Society, 53 (1).
187 - 191.
ISSN 2510-1560; ESSN: 2510-1579
Mohd Zawawi, Mohd Khairul Ikhwan and Azis, Raba'ah Syahidah and Hashim, Mansor and Holland, Diane and Howes, A. P. and Zakaria, Azmi and Hassan, Jumiah
(2014)
The formation of yttrium aluminium monoclinic (Y4Al2O9) by sol-gel synthesis at low heating temperature.
Journal of the Australian Ceramic Society, 50 (2).
pp. 17-24.
ISSN 0004-881X
S
Shafiee, Farah Nabilah and Azis, Raba’ah Syahidah and Abdullah, Nor Hapishah and Mustaffa, Muhammad Syazwan and Nazlan, Rodziah and Ismail, Ismayadi and Hamidon, Mohd Nizar and Hasan, Intan Helina
(2020)
Potential patch antenna application with particle size variation in polycrystalline gadolinium iron garnet (GdIG).
Journal of the Australian Ceramic Society, 56.
1097 - 1105.
ISSN 2510-1560; ESSN: 2510-1579
Z
Zangina, Tasiu and Hassan, Jumiah and Azis, Raba’ah Syahidah and Matori, Khamirul Amin and See, Alex and Alibe, Ibrahim Mustapha and Umar, Sadiq
(2017)
Structural, electrical conductivity and dielectric relaxation behavior of LiHf2(PO4)3 ceramic powders.
Journal of the Australian Ceramic Society, 54 (2).
pp. 307-316.
ISSN 0004-881X