Browse by Journal Title

Nik Ab Rashid, Nik Muhammad Hafiz and Hairuddin, Abdul Aziz and Md Rezali, Khairil Anas and Masuri, Siti Ujila and A.A.Mossa, Muntasser (2023) Numerical study of piston bowl geometries on PFI-HCCI engine performance. Journal of Mechanical Engineering and Sciences, 17 (4). pp. 9689-9699. ISSN 2289-4659

Abdul Karim, Julia and Lanyau, Tony and Maskin, Masleha and Anuar, M. A. S. and Che Soh, Azura and Abdul Rahman, Ribhan Zafira (2020) Preliminary study on fault detection using artificial neural network for water-cooled reactors. Journal of Mechanical Engineering and Sciences, 14 (4). 7469 - 7480. ISSN 2289-4659; ESSN: 2231-8380

N. S. B., Yusof and Salit, Mohd Sapuan and M. T. H., Sultan and Jawaid, Mohammad (2020) Life cycle analysis of hybrid oil palm/glass fibre reinforced polyurethane composites for automotive crash box. Journal of Mechanical Engineering and Sciences, 14 (3). 7132 - 7140. ISSN 2289-4659; ESSN: 2231-8380

Mazlan, Shahan and Yidris, Noorfaizal and Zahari, R. and Gries, E. and Abang Abdul Majid, Dayang Laila and Ahmad, Kamarul Arifin (2020) Prediction of fatigue life of aluminum 2024-T3 at low temperature by finite element analysis. Journal of Mechanical Engineering and Sciences, 14 (3). 7170 - 7180. ISSN 2289-4659; ESSN: 2231-8380

Mohd Nor, Nor Aznan and Baharudin, B. T. Hang Tuah and Ghani, Jaharah and Leman, Zulkiflle and Mohd Ariffin, Mohd Khairol Anuar (2020) Effect of chip load and spindle speed on cutting force of Hastelloy X. Journal of Mechanical Engineering and Sciences, 14 (1). 6497 - 6503. ISSN 2289-4659; ESSN: 2231-8380

Bajuri, Farid and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan and Uyup, M. K. A. (2020) Effect of impregnation on hybrid mesoporous silica / kenaf reinforced epoxy composites in term of flexural, compressive and water absorption properties. Journal of Mechanical Engineering and Sciences, 14 (4). 7528 - 7539. ISSN 2289-4659; ESSN: 2231-8380

Mohd Basri, Mohd Salahuddin and Mazlan, Norkhairunnisa and Mustapha, Faizal and Ishak, Mohamad Ridzwan and Saprudin, Abby Ashraff (2020) Factorial design approach to investigate the significance of factors on the fire resistant, compression and adhesion properties of geopolymer binder. Journal of Mechanical Engineering and Sciences, 14 (3). 7191 - 7204. ISSN 2289-4659; ESSN: 2231-8380

Sairy, Nur Aqilah and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan and Zulkepli, Nik Noriman (2020) Investigation on the flexural properties of nanofillers loading on the Jute/Carbon/PLA nanocomposites. Journal of Mechanical Engineering and Sciences, 14 (4). 7424 - 7433. ISSN 2289-4659; ESSN: 2231-8380

Pshtiwan, M. Sharif and A. Aziz, Hairuddin and Azizan, As'ary and Khairil Anas, Md. Rezali and M. M., Noor and Shareef, Saman M. (2019) Development of evaporative intercooler heat exchanger for vehicle charge air enhancement using CFD simulation. Journal of Mechanical Engineering and Sciences, 13 (4). pp. 6195-6217. ISSN 2231-8380

Azizi, Muhammad Azim and Mohd Ihsan, Ahmad Kamal Ariffin (2019) Peridynamic model for nonlinear viscoelastic creep and creep rupture of Polypropylene. Journal of Mechanical Engineering and Sciences, 13 (4). pp. 5735-5752. ISSN 2289-4659; ESSN: 2231-8380

Muhammad, Noryani and Salit, Mohd Sapuan and Mohammad Taha, Mastura (2018) Multi-criteria decision-making tools for material selection of natural fibre composites: a review. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3330-3353. ISSN 2289-4659; ESSN: 2231-8380

Alkateb, Mohamed and Salit, Mohd Sapuan and Leman, Zulkiflle and Jawaid, Mohammad and Ishak, Mohamad Ridzwan (2018) Quasi-static crush behaviour of environmentally friendly kenaf/wool epoxy composites elliptical tube. Journal of Mechanical Engineering and Sciences, 12 (2). 3671 - 3688. ISSN 2289-4659; ESSN: 2231-8380

Z., Ansari and C.W., Tan and Mat Rejab, Mohd Ruzaimi and Bachtiar, Dandi and J., Siregar and Mohamed Yusoff, Mohd Zuhri and N.S.D.M., Marzuki (2017) Crushing behaviour of composite square honeycomb structure: a finite element analysis. Journal of Mechanical Engineering and Sciences, 11 (2). 2637 - 2649. ISSN 2289-4659; ESSN: 2231-8380

N., Mohd Nurazzi and A., Khalina and S., M. Sapuan and A. M., Dayang Laila and M., Rahmah (2017) Curing behaviour of unsaturated polyester resin and interfacial shear stress of sugar palm fibre. Journal of Mechanical Engineering and Sciences, 11 (2). 2650 - 2664. ISSN 2289-4659; ESSN: 2231-8380

Muhammad Amin, Ahmad Fairuz and Salit, Mohd Sapuan and Zainudin, Edi Syams and Jaafar, Che Nor Aiza (2016) Effect of filler loading on mechanical properties of pultruded kenaf fibre reinforced vinyl ester composites. Journal of Mechanical Engineering and Sciences, 10 (1). pp. 1931-1942. ISSN 2289-4659; ESSN: 2231-8380

Mohd Salleh, Salwani and Sahari, Barkawi and Ali, Aidy and Abdul Aziz, Nuraini (2015) Assessment of head injury criteria and chest severity index for frontal impact. Journal of Mechanical Engineering and Sciences, 8. pp. 1376-1382. ISSN 2289-4659; ESSN: 2231-8380

Tengku Mohd, Tengku Azman and Hassan, Mohd Khair and Abdul Aziz, Wan Mohd Khidhir (2015) Mathematical modeling and simulation of an electric vehicle. Journal of Mechanical Engineering and Sciences, 8. pp. 1312-1321. ISSN 2289-4659; ESSN: 2231-8380

Mohamed Ariff, Azmah Hanim and Ourdjini, Ali and Idris, Siti Rabiatul Aisha and Osman, Saliza Azlina (2015) Thermal cyclic test for Sn-4Ag-0.5Cu solders on high P Ni/Au and Ni/Pd/Au surface finishes. Journal of Mechanical Engineering and Sciences, 9. pp. 1572-1579. ISSN 2289-4659; ESSN: 2231-8380

Mohammad Taha, Mastura and Salit, Mohd Sapuan and Mansor, Muhd Ridzuan (2015) A framework for prioritizing customer requirements in product design: incorporation of FAHP with AHP. Journal of Mechanical Engineering and Sciences, 9. pp. 1655-1670. ISSN 2289-4659; ESSN: 2231-8380

Mat Nawi, Nazmi and Chen, Guangnan and Jensen, Troy (2014) Prediction of sugarcane quality from juice samples using portable spectroscopy. Journal of Mechanical Engineering and Sciences, 7. pp. 1219-1226. ISSN 2289-4659; ESSN: 2231-8380

Hairuddin, Abdul Aziz and Wandel, Andrew P. and Yusaf, Talal (2014) An introduction to a homogeneous charge compression ignition engine. Journal of Mechanical Engineering and Sciences, 7. pp. 1042-1052. ISSN 2289-4659; ESSN: 2231-8380

Supeni, Eris Elianddy and Epaarachchi, Jayantha Ananda and Islam, Md Mainul and Lau, Kin Tak (2014) Development of artificial neural network model in predicting performance of the smart wind turbine blade. Journal of Mechanical Engineering and Sciences, 6. pp. 734-745. ISSN 2289-4659; ESSN: 2231-8380

Mohd Salleh, Salwani and Sahari, Barkawi and Ali, Aidy and Abdul Aziz, Nuraini (2014) The effect of automotive side member filling on car frontal impact performance. Journal of Mechanical Engineering and Sciences, 6. pp. 873-880. ISSN 2289-4659; ESSN: 2231-8380

Abdul Aziz, Nuraini and Zainal, Ana Sakura and Mohamed Ariff, Azmah Hanim (2014) The effects of welding parameters on butt joints using robotic gas metal arc welding. Journal of Mechanical Engineering and Sciences, 6. pp. 988-994. ISSN 2289-4659; ESSN: 2231-8380

Abdul Hanan, Umar and Zainudin, Edi Syams and Salit, Mohd Sapuan (2012) Effect of accelerated weathering on tensile properties of kenaf reinforced high-density polyethylene composites. Journal of Mechanical Engineering and Sciences, 2. pp. 198-205. ISSN 2289-4659; ESSN: 2231-8380

Ibrahim, Mohd Shukri and Salit, Mohd Sapuan and Abdul Aziz, Faieza (2012) Mechanical and thermal properties of composites from unsaturated polyester filled with oil palm ash. Journal of Mechanical Engineering and Sciences, 2. pp. 133-147. ISSN 2289-4659; ESSN: 2231-8380