Browse by Journal Title

How, C. K. and Salem Hamouda, Abdel Magid and Megat Ahmad, Megat Mohamad Hamdan and Radin Sohadi, Radin Umar (2003) The Crashing Behaviour of Motorcycle Basket under Impact Loading. Journal of Materials Processing Technology, 132 (1-3). pp. 1-8. ISSN 0924-0136

Hamouda, Abdel Magid Salem and Sulaiman, Shamsuddin and Hashmi, M. S. J. (1996) Fast upsetting of circular cylinders of aluminium metal matrix composites: experimental results and numerical analysis. Journal of Materials Processing Technology, 60 (1-4). pp. 723-727. ISSN 0924-0136; eISSN: 1873-4774

Lim, Mei Yee and Mahmud, Habibun Nabi Muhammad Ekramul and Kassim, Anuar and Mat Yunus, Wan Mahmood (2009) Organic conductor: influence of preparation temperature. Journal of Materials Processing Technology, 209 (8). pp. 3931-3936. ISSN 0924-0136; ESSN: 1873-4774

Mustapha, Faizal and Mustapha, Mazli and Noorsal, Kartini and Mamat, Othman and Hussain, Patthi and Ahmad, Faiz and Muhamad, Norhamidi and Mohamed Haris, Sallehuddin (2010) Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process. Journal of Materials Processing Technology, 210 (12). pp. 1598-1612. ISSN 0924-0136; ESSN: 1873-4774

Matoorian, Pouria and Sulaiman, Shamsuddin and Megat Ahmad, Megat Mohamad Hamdan (2008) An experimental study for optimization of electrical discharge turning (EDT) process. Journal of Materials Processing Technology, 204 (1-3). pp. 350-356. ISSN 0924-0136

Sulaiman, Shamsuddin and Mohd Sayuti, and Samin, Razali (2008) Mechanical properties of the as-cast quartz particulate reinforced LM6 alloy matrix composites. Journal of Materials Processing Technology, 201 (1-3). pp. 731-735. ISSN 0924-0136

Salim, Hiziroglu and Uyup, Mohd Khairun Anwar and Hussain, Hamdan and Md. Tahir, Paridah (2007) Evaluation of surface quality of some Malaysian species as function of outdoor exposure. Journal of Materials Processing Technology, 199 (1-3). pp. 156-162. ISSN 0924-0136

Syed Shaharuddin, Sharifah Imihezri and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Megat Ahmad, Megat Mohamad Hamdan and Zainuddin, Edi Syams and Osman, Mohd Rasid and Abdul Rahman, Mohd Zaki (2006) Mould flow and component design analysis of polymeric based composite automotive clutch pedals. Journal of Materials Processing Technology, 171 (3). pp. 358-365. ISSN 0924-0136

Shuaeib, Farag Mohamed and Salem Hamouda, Abdel Magid and Radin Sohadi, Radin Umar and Megat Ahmad, Megat Mohamad Hamdan and M. Saleem, J. Hashmi (2002) Motorcycle Helmet Part I. Biomechanics and Computational Issues. Journal of Materials Processing Technology, 123 (3). pp. 406-421. ISSN 0924-0136

Shuaeib, Farag Mohamed and Salem Hamouda, Abdel Magid and Megat Ahmad, Megat Mohamad Hamdan and Radin Sohadi, Radin Umar and M. Saleem, J. Hashmi (2002) Motorcycle Helmet Part II. Materials and Design Issues. Journal of Materials Processing Technology, 123 (3). pp. 422-431. ISSN 0924-0136

Tang, Sai Hong and Tan, Y. J. and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Ismail, Napsiah and Samin, Razali (2007) The use of Taguchi method in the design of plastic injection mould for reducing warpage. Journal of Materials Processing Technology, 182 (1-3). pp. 418-426. ISSN 0924-0136; ESSN: 1873-4774