Keyword Search:

Items where Division is "Institute of Advanced Technology" and Year is 2008

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Author | Item Type | No Grouping
Jump to: A | D | H | J | K | M | N | P | S | Y
Number of items: 14.

A

Abdalla, F. Hamed and Megat Ahmad, Megat Mohamad Hamdan and Salit, Mohd Sapuan and Sahari, Barkawi (2008) Determination of volume fraction values of filament wound glass and carbon fiber reinforced composites. Journal of Engineering and Applied Sciences, 3 (4). pp. 7-11. ISSN 1819-6608

D

Dahshal, Mehrdad Hadipour (2008) Gis- Based Environmental Modeling for Integration of Urban Accessibility and Air Quality. PhD thesis, Universiti Putra Malaysia.

H

Hamed, Abdalla F. and Megat Ahmad, Megat Mohamad Hamdan and Salit, Mohd Sapuan and Sahari, Barkawi (2008) Theoretical analysis for calculation of the through thickness effective constants for orthotropic thick filament wound tubes. Polymer-Plastics Technology and Engineering, 47 (10). pp. 1008-1015. ISSN 0360-2559; ESSN: 1525-6111

J

Jeber , Faisal and Omar, Husaini and Ahmad, Noordin and Mahmud, Mahdzir (2008) Satellite data potential for landslide studies in tropical regions. Disaster Prevention and Management, 17 (4). pp. 470-477. ISSN 0965-3562

K

Kong, Hong Shim (2008) Development of a Neural-Fuzzy Model for Machinability Data Selection in Turning Process. Masters thesis, Universiti Putra Malaysia.

M

Mohd Rahim, Mohd Shafry (2008) Development of a Spatiotemporal Data Model for Management and Visualization of Surface Movement Data. PhD thesis, Universiti Putra Malaysia.

Mohd Shah, Nurisya (2008) Energy Eigenequation Expansion for a Particle on Singly Punctured Two-Torus and Triply Punctured Two-Sphere Systems. Masters thesis, Universiti Putra Malaysia.

Motlagh, O. and Tang, Sai Hong and Ismail, Napsiah and Ramli, Abdul Rahman and Samin, Razali (2008) A novel approach to human motion estimation with applications in human-robot safety. International Journal of Engineering and Technology, 5 (2). pp. 129-137. ISSN 1823-1039

Musharavati, Farayi and Ismail, Napsiah and S. Hamouda, Abdel Magid Salem and Ramli, Abdul Rahman (2008) A metaheuristic approach to manufacturing process planning in reconfigurable manufacturing systems. Jurnal Teknologi, 48 (A). pp. 55-70. ISSN 0127–9696; ESSN: 2180–3722

N

New Straits Times, Mohd Peter Davis (2008) Hi-Tech Farms The Answer. UNSPECIFIED, (Call Number: UNSPECIFIED)

P

Pourvakhshouri, Seyedeh Zahra (2008) Coastal Priority Ranking in Oil Spill Response Decision Support Mechanism. PhD thesis, Universiti Putra Malaysia.

S

Sahari, Barkawi and Arsad, N. M. and Hamouda, Abdel Magid Salem and Wong, Shaw Voon and Ahmad, M. F. (2008) The Effect of Ribs on Behavior of Natural Gas Vehicle Platform Backbone with Stamping Consideration. In: 13th International Conference on Applied Mechanics and Mechanical Engineering., 27-29 May, 2008, Military Technical College Kobry El-Kobbah, Cairo, Egypt.. pp. 67-78.

Sarijo, Siti Halimah (2008) Synthesis and Controlled Release Characterization of Zinc-Aluminium-Layered Double Hydroxide-Chlorophenoxyacetates Nanohybrids. PhD thesis, Universiti Putra Malaysia.

Y

Yahya, Noorhana and Bawa Waje, Samaila and Ramli, Irmawati (2008) Carbon nanopipe catalysed by as-prepared NiO nanoparticles. Sains Malaysiana, 37 (3). pp. 289-293. ISSN 0026-6039

This list was generated on Fri Jul 3 20:31:59 2015 MYT.