Items where Author is "Sulaiman, Mohd Hafis"

Ibrahim, Muhammad Shuhaimi and Sulaiman, Mohd Hafis and S. Ismail, Mohd Idris Shah (2024) Enhancing wear resistance in blanking and punching of stainless-steel sheets under dry friction and solid lubrication conditions using single-layer ceramic- and carbon-based hard coatings. Jurnal Tribologi, 40. pp. 139-147. ISSN 2289-7232; eISSN: 2289-7232 (Submitted)

Hussain, Haja Syed and Jamir, Mohd Ridzuan Mohd and Majid, Mohd Shukry Abdul and Rahman, Ahmad Syayuthi Abdul and Deros, Mohd Azaman Md and Sulaiman, Mohd Hafis (2024) Tribological behaviour of Furcraea Foetida fiber-reinforced epoxy composites under varying applied loads. Journal of Advanced Research in Applied Sciences and Engineering Technology, 33 (3). 98 -111. ISSN 2462- 943

Md Yasir, Ahmad Shah Hizam and Sukindar, Nor Aiman and Abdul Rahman Putra, Ahmad Afif and Choong, Yang Chuan and Kamaruddin, Shafie and Aziz, Azlan and Aminanda, Yulfian and Sulaiman, Mohd Hafis (2024) Effect of heat treatment on mechanical properties and dimensional accuracy of 3D-Printed black carbon fiber HTPLA. Heliyon, 10 (11). art. no. e32282. pp. 1-24. ISSN 2405-8440; eISSN: 2405-8440

Sukindar, Nor Aiman and Md Yasir, Ahmad Shah Hizam and Azhar, Muhammad Danial and Md Azhar, Muhammad Afif and Abd Halim, Nor Farah Huda and Sulaiman, Mohd Hafis and Ahmad Sabli, Ahmad Syamaizar and Mohd Ariffin, Mohd Khairol Anuar (2024) Evaluation of the surface roughness and dimensional accuracy of low-cost 3D-printed parts made of PLA–aluminum. Heliyon, 10 (4). art. no. e25508. pp. 1-13. ISSN 2405-8440

Hassan, Affendy and Sulaiman, Mohd Hafis and Ibrahim, Muhammad Shuhaimi and Abd Rahman, Abu Bakar (2024) Investigating fertilizer spreader blades for improved flow behaviours and material resilience in palm plantation settings. Journal of Advanced Research in Applied Sciences and Engineering Technology, 114 (2). pp. 214-226. ISSN 2289 - 7879

Leong, Ming Rui and Sulaiman, Mohd Hafis and Azizan Ashman, Muhammad Ashman Hakimi and Ibrahim, Muhammad Shuhaimi and Mohd Jamir, Mohd Ridzuan (2023) Enhancing physical, mechanical, tribological and contact characteristics of water-based lubrication using ceramic nanomaterials MgO and SiC for metal-to-metal sliding interfaces. Jurnal Tribologi, 39. pp. 51-68. ISSN 2289-7232

Ideris, Muhammad Haziq and Kamaruddin, Shafie and Sulaiman, Mohd Hafis and Nor Aiman Sukindar, Nor Aiman and Ahmad Azhar, Ahmad Zahirani and Md Yasir, Ahmad Shah Hizam (2023) Effects of coating and lubrication on friction and wear for metal-to metal application. Journal of Advanced Research in Applied Mechanics, 110 (1). pp. 52-62. ISSN 2289 - 7895

Mohamed Ariff, Azmah Hanim and Jun Lin, Ong and Jung, Dong-Won and Mohd Tahir, Suraya and Sulaiman, Mohd Hafis (2022) Rice husk ash as pore former and reinforcement on the porosity, microstructure, and tensile strength of aluminum mmc fabricated via the powder metallurgy method. Crystals, 12 (8). art. no. 1100. pp. 1-10. ISSN 2073-4352