Items where Author is "Md Deros, Mohd Azaman"

Mohd Radzi, Mohd Hafiezal and Abdan, Khalina and Zainal Abidin, Zurina and Md Deros, Mohd Azaman and Zin, Mohd Hanafee (2020) Effect of blend composition on characteristics and performance of Jatropha bio-epoxy/epoxy matrix in composites with carbon fiber reinforcement. BioResources, 15 (2). 4464 - 4501. ISSN 1930-2126

Nor Mohamed, Sity Ainy and Zainudin, Edi Syams and Salit, Mohd Sapuan and Md Deros, Mohd Azaman and Tajul ariffin, Ahmad Mubarak (2019) Integration of taguchi-grey relational analysis technique in parameter process optimization for rice husk composite. BioResources, 14 (1). pp. 1110-1126. ISSN 1930-2126

Mohd Radzi, Mohd Hafiezal and Abdan, Khalina and Zainal Abidin, Zurina and Md Deros, Mohd Azaman and Zin, Mohd Hanafee (2019) Thermal and flammability characteristics of blended jatropha bio-epoxy as matrix in carbon fiber–reinforced polymer. Journal of Composites Science, 3 (1). art. no. 6. pp. 1-13. ISSN 2504-477X

Md Deros, Mohd Azaman and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Zainudin, Edi Syams and Abdan, Khalina (2015) Optimization and numerical simulation analysis for molded thin-walled parts fabricated using wood-filled polypropylene composites via plastic injection molding. Polymer Engineering & Science, 55 (5). pp. 1082-1095. ISSN 0032-3888; ESSN: 1548-2634

Md Deros, Mohd Azaman and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Zainudin, Edi Syams and Abdan, Khalina (2014) Numerical simulation analysis of the in-cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-walled parts formed by the injection moulding process. Materials and Design, 55. pp. 381-386. ISSN 0264-1275; ESSN: 1873-4197

Md Deros, Mohd Azaman and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Zainudin, Edi Syams and Abdan, Khalina (2014) Numerical simulation on moulded thin-walled parts via injection moulding process. Applied Mechanics and Materials, 575. pp. 73-77. ISSN 1660-9336; ESSN: 1662-7482

El-Shekeil, Yousuf Ali and Salit, Mohd Sapuan and Md Deros, Mohd Azaman and Jawaid, Mohammad (2013) Optimization of blending parameters and fiber size of kenaf-bast-fiber-reinforced the thermoplastic polyurethane composites by Taguchi method. Advances in Materials Science and Engineering, 2013 ( ). art. no. 686452. pp. 1-5. ISSN 1687-8434

Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdan, Khalina and Sulaiman, Shamsuddin and Md Deros, Mohd Azaman (2013) An investigation of the processability of natural fibre reinforced polymercomposites on shallow and flat thin-walled parts by injection moulding process. Materials and Design, 50 (September). pp. 451-456. ISSN 0261-3069

Md Deros, Mohd Azaman and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Zainudin, Edi Syams and Abdan, Khalina (2015) Processability of wood fibre-filled thermoplastic composite thin-walled parts using injection moulding. In: Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer International Publishing Switzerland, Cham, pp. 351-367. ISBN 9783319079431; EISBN: 9783319079448

Md Deros, Mohd Azaman (2015) Injection moulding simulation of wood–filled polypropylene thin-walled composite parts. Doctoral thesis, Universiti Putra Malaysia.