Items where Author is "Lubis, Muhammad Adly Rahandi"
Up a level |
Group by: Item Type | No Grouping
Jump to: Article
Number of items: 9.
Article
Lubis, Muhammad Adly Rahandi and Aristri, Manggar Arum and Sari, Rita Kartika and Iswanto, Apri Heri and Al-Edrus, Syeed Saifulazry Osman and Sutiawan, Jajang and Lee, Seng Hua and Antov, Petar and Kristak, Lubos
(2024)
Isocyanate–free tannin–based polyurethane resins for enhancing thermo-mechanical properties of ramie (Boehmeria nivea L.) fibers.
Alexandria Engineering Journal, 90.
pp. 54-64.
ISSN 1110-0168; ESSN: 2090-2670
Mohd Yusof, Norwahyuni and Md Tahir, Paridah and Lee, Seng Hua and Anwar Uyup, Mohd Khairun and James, Redzuan Mohammad Suffian and Osman Al-Edrus, Syeed Saifulazry and Kristak, Lubos and Reh, Roman and Lubis, Muhammad Adly Rahandi
(2023)
Effects of adhesive types and structural configurations on shear performance of laminated board from two Gigantochloa bamboos.
Forests, 14 (3).
pp. 1-15.
ISSN 1999-4907
Mohd Yusof, Norwahyuni and Hua, Lee Seng and Md Tahir, Paridah and James, Redzuan Mohammad Suffian and Al-Edrus, Syeed Saifulazry Osman and Dahali, Rasdianah and Muhammad Roseley, Adlin Sabrina and Fatriasari, Widya and Kristak, Lubos and Lubis, Muhammad Adly Rahandi and Reh, Roman
(2023)
Effects of boric acid pretreatment on the properties of four selected malaysian bamboo strips.
Forests, 14 (2).
art. no. 196.
pp. 1-16.
ISSN 1999-4907
Ahamad, Wan Nabilah and Salim, Sabiha and Lee, Seng Hua and Abdul Ghani, Muhammad Aizat and Mohd Ali, Rabiatol Adawiah and Md Tahir, Paridah and Fatriasari, Widya and Antov, Petar and Lubis, Muhammad Adly Rahandi
(2023)
Effects of compression ratio and phenolic resin concentration on the properties of laminated compreg inner oil palm and sesenduk wood composites.
Forests, 14 (1).
pp. 83-14.
ISSN 1999-4907
Maulana, Muhammad Iqbal and Lubis, Muhammad Adly Rahandi and Febrianto, Fauzi and Lee, Seng Hua and Iswanto, Apri Heri and Antov, Petar and Kristak, Lubos and Efri Mardawati and Rita Kartika Sari and Zaini, Lukmanul Hakim and Hidayat, Wahyu and Giudice, Valentina Lo and Todaro, Luigi
(2022)
Environmentally friendly starch-based adhesives for bonding high-performance wood composites: a review.
Forests, 13 (10).
art. no. 1614.
pp. 1-24.
ISSN 1999-4907
Iswanto, Apri Heri and Madyaratri, Elvara Windra and Hutabarat, Nicko Septuari and Zunaedi, Eka Rahman and Darwis, Atmawi and Hidayat, Wahyu and Susilowati, Arida and Adi, Danang Sudarwoko and Lubis, Muhammad Adly Rahandi and Sucipto, Tito and Fatriasari, Widya and Antov, Petar and Savov, Viktor and Lee, Seng Hua
(2022)
Chemical, physical, and mechanical properties of belangke bamboo (Gigantochloa pruriens) and its application as a reinforcing material in particleboard manufacturing.
Polymers, 14 (15).
art. no. 3111.
pp. 1-25.
ISSN 2073-4360
Lubis, Muhammad Adly Rahandi and Handika, Sucia Okta and Rita Kartika Sari and Iswanto, Apri Heri and Antov, Petar and Kristak, Lubos and Lee, Seng Hua and Pizzi, Antonio
(2022)
Modification of Rrmie fiber via impregnation with low viscosity bio-polyurethane resins derived from lignin.
Polymers, 14 (11).
art. no. 2165.
pp. 1-22.
ISSN 2073-4360
Lee, Seng Hua and Lum, Wei Chen and Boon, Jia Geng and Kristak, Lubos and Antov, Petar and Pędzik, Marta and Rogoziński, Tomasz and Taghiyari, Hamid R. and Lubis, Muhammad Adly Rahandi and Fatriasari, Widya and Yadav, Sumit Manohar and Chotikhun, Aujchariya and Pizzi, Antonio
(2022)
Particleboard from agricultural biomass and recycled wood waste: a review.
Journal of Materials Research and Technology, 20.
4630 - 4658.
ISSN 2238-7854; ESSN: 2214-0697
Zainal Abidin, Wan Nur Shasha Najiha and Al-Edrus, Syeed Saifulazry Osman and Hua, Lee Seng and Abdul Ghani, Muhammad Aizat and A. Bakar, Balkis Fatomer and Ishak, Ridzuan and Qayyum Ahmad Faisal, Fadhlin and Sabaruddin, Fatimah Athiyah and Kristak, Lubos and Lubis, Muhammad Adly Rahandi and Reh, Roman and Hiziroglu, Salim
(2022)
Properties of phenol formaldehyde-bonded layered laminated woven bamboo mat boards made from Gigantochloa scortechinii.
Applied Sciences, 13 (1).
art. no. 47.
pp. 1-14.
ISSN 2076-3417