Items where Author is "Ismail, Mohd Idris Shah"

Haohao, Ma and As’arry, Azizan and Xuping, Wu and Ismail, Mohd Idris Shah and Ramli, Hafiz Rashidi and Saad, Mohd Sazli and Delgoshaei, Aidin (2024) Improved dung beetle optimization algorithm and finite element analysis for spindle optimization. Indonesian Journal of Electrical Engineering and Computer Science, 36 (1). pp. 559-569. ISSN 2502-4752; eISSN: 2502-4760

Liu, Jiajia and Zainudin, Edi Syams and As'arry, Azizan and Ismail, Mohd Idris Shah (2024) Modeling approach of cloud 4D printing service composition optimization based on non-dominated sorting genetic algorithm III. International Journal of Automotive and Mechanical Engineering, 21 (3). pp. 11453-11468. ISSN 2229-8649; eISSN: 2180-1606

Domadia, Mohd Khairul and Ismail, Mohd Idris Shah and Mohamed Yusoff, Mohd Zuhri and Mohd Pisa, Mohd Hanif (2024) Evaluation of cutting parameters on heat-affected zone in wood plastic composites by pulsed fiber laser. Jurnal Kejuruteraan, 36 (3). pp. 837-846. ISSN 2289-7526

Haohao, Ma and As’arry, Azizan and Haoyang, Zhang and Ismail, Mohd Idris Shah and Ramli, Hafiz Rashidi and Zuhri, Mohd Yusoff Moh and Delgoshaei, Aidin (2024) Inverse kinematics of six degrees of freedom robot manipulator based on improved dung beetle optimizer algorithm. IAES International Journal of Robotics and Automation, 13 (3). pp. 272-282. ISSN 2089-4856; eISSN: 2722-2586

Mohd Radzman, Mohamad Aizat and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Tang, Sai Hong and As'arry, Azizan (2023) Multi-objective optimization in surface transformation hardening of S50C carbon steel by single-mode fiber laser. Jurnal Tribologi, 39. pp. 106-116. ISSN 2289-7232

Wang, Xinming and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2023) Comparative study on leaf disease identification using Yolo v4 and Yolo v7 algorithm. AgBioForum, 25 (1). 58 - 67. ISSN 1522-936X

Al-Zubaidi, Razi and Ariffin, Mohd Khairol and Ismail, Mohd Idris Shah and Ahmad, Kamarul Arifin and Raqee, Ali and Abdulsamad, Akram (2023) Sustainable development through effective project management: the Petromasila in Yemen. Advances in Social Sciences Research Journal, 10 (3). pp. 269-290. ISSN 2055-0286

Al-Zubaidi, Razi and Mohd Ariffin, Mohd Khairol Anuar and Abdulsamad, Akram and Raqee, Ali and Ismail, Mohd Idris Shah and Ahmad, Kamarul Arifin (2022) The effect of self-efficacy on sustainable development: the PetroMasila in Yemen. Advances in Social Sciences Research Journal, 9 (12). 35 - 49. ISSN 2055-0286

Omar, Mohd Asnawi and Baharudin, B. T. Hang Tuah and Sulaiman, S. and Ismail, Mohd Idris Shah and Omar, Mohd Afian (2021) Characterisation of elemental analysis, carbon sulphur analysis and impact test of stent manufacturing using medical grade ASTM F75 cobalt chromium (CoCrMo) by selective laser melting (SLM) technology. Advances in Materials and Processing Technologies, 7 (2). 200 - 215. ISSN 2374-068X; ESSN: 2374-0698

Aljermi, Almukhtar IB. A. and Sulaiman, S. and Mohamed Ariff, Azmah Hanim and Ismail, Mohd Idris Shah (2021) Effect of heat treatment on the corrosion behaviour of LM6 in sulphuric acid and sodium hydroxide. International Research Journal of Engineering and Technology, 8 (8). 982 - 989. ISSN 2395-0072; ESSN: 2395-0056

Abdul Mutalib, Mohd Zurrayen and Ismail, Mohd Idris Shah and As'arry, Azizan and Abdul Jalil, Nawal Aswan (2020) Multi-objective optimization in friction drilling of AISI1045 steel using grey relational analysis. International Journal of Modern Manufacturing Technologies, 12 (1). 75 - 81. ISSN 2067–3604

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2020) Crossing weighted uncertainty scenarios assisted distribution-free metamodel-based robust simulation optimization. Engineering with Computers, 36 (1). 139 - 150. ISSN 0177-0667; ESSN: 1435-5663

Lalegani Dezaki, Mohammadreza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2020) Effects of CNC machining on surface roughness in Fused Deposition Modelling (FDM) products. Materials, 13 (11). pp. 1-28. ISSN 1996-1944

Abdul Mutalib, Mohd Zurrayen and Ismail, Mohd Idris Shah and As'arry, Azizan and Abdul Jalil, Nawal Aswan (2020) Evaluation of tool wear and machining performance by analyzing vibration signal in friction drilling. Jurnal Tribologi, 24. 100 - 109. ISSN 2289-7232

Hozoorbakhsh, Asghar and Hamdi, Mohamed and Mohammed Sarhan, Ahmed Aly Diaa and Ismail, Mohd Idris Shah and Tang, Chak Yin and Tsui, Gary Chi Pong (2019) CFD modelling of weld pool formation and solidification in a laser microwelding process. International Communications in Heat and Mass Transfer, 101. pp. 58-69. ISSN 0735-1933; ESSN: 1879-0178

Baara, Wisam Ali Basher and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2019) Effect of elastic module degradation measurement in different sizes of the nonlinear isotropic–kinematic yield surface on springback prediction. Metals, 9 (5). art. no. 511. pp. 1-12. ISSN 2075-4701

Dehghan, Shayan and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah and Parnianifard, Amir (2019) Experimental Investigation on Friction Drilling of Stainless Steel AISI 304. International Journal of Machining and Machinability of Materials, 21 (4). pp. 279-299. ISSN 1748-5711; ESSN: 1748-572X

Dehghan, Shayan and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2019) Friction drilling of difficult-to-machine materials: workpiece microstrutural alterations and tool wear. Metals, 9 (9). art. no. 945. pp. 1-14. ISSN 2075-4701

Dehghan, Shayan and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2019) Friction drilling of difficult-to-machine materials: workpiece microstructural alterations and tool wear. Metals, 9 (9). art. no. 945. pp. 1-14. ISSN 2075-4701

Dehghan, Shayan and Ismail, Mohd Idris Shah and Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2019) Measurement and analysis of thrust force and torque in friction drilling of difficult-to-machine materials. International Journal of Advanced Manufacturing Technology, 105. pp. 2749-2769. ISSN 0268-3768; ESSN: 1433-3015

Ismail, Nazarul Abidin and Ismail, Mohd Idris Shah and Mohd Radzman, Mohamad Aizat and Mohd Ariffin, Mohd Khairol Anuar and As'arry, Azizan (2019) Parametric optimization of robot-based single point incremental forming using Taguchi method. International Journal of Integrated Engineering, 11 (1). pp. 217-224. ISSN 2229-838X; ESSN: 2600-7916

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah and Ebrahim, Nader Ale (2019) Recent developments in metamodel based robust black-box simulation optimization: an overview. Decision Science Letters, 8 (1). pp. 17-44. ISSN 1929-5804; ESSN: 1929-5812

Sulaiman, Shamsuddin and Aljermi, M. and Ismail, Mohd Idris Shah and Fadzil, M. F. (2019) Thermal-induced defects and optimization of casting process. International Journal of mechanical Engineering and Robotics Research, 8 (6). pp. 1-5. ISSN 2278-0149

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2019) Trade-off in robustness, cost and performance by a multi-objective robust production optimization method. International Journal of Industrial Engineering Computations, 10 (1). pp. 133-148. ISSN 1923-2926; ESSN: 1923-2934

Wahid, Zaliha and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Mustapha, Faizal and Ismail, Mohd Idris Shah (2019) A study on properties of polymer-based additive manufacturing. Jurnal Kejuruteraan, 31 (1). pp. 93-98. ISSN 0128-0198; ESSN: 2289-7526

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah and Maghami, Mohammad Reza and Gomes, Chandima (2018) Kriging and Latin hypercube sampling assisted simulation optimization in optimal design of PID controller for speed control of DC motor. Journal of Computational and Theoretical Nanoscience, 15 (5). 1471 - 1479. ISSN 1546-1955; ESSN: 1546-1963

Imhan, Khalil Ibraheem and Baharudin, B. T. Hang Tuah and Zakaria, Azmi and Ismail, Mohd Idris Shah and Hadi Alsabti, Naseer Mahdi and Ahmad, Ahmad Kamal (2018) Improve the material absorption of light and enhance the laser tube bending process utilizing laser softening heat treatment. Optics and Laser Technology, 99. 15 - 18. ISSN 0030-3992; ESSN: 1879-2545

Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah and Sukindar, Nor Aiman (2018) Analysis of mechanical properties of polylactic acid using a new 3D printer nozzle. Journal of Computational and Theoretical Nanoscience, 15 (2). 666 - 675. ISSN 1546-1955; ESSN: 1546-1963

Ismail, Mohd Idris Shah and Abdul Jalil, Nawal Aswan and As'arry, Azizan and Abdul Mutalib, Mohd Zurrayen (2018) Characterization of tool wear in friction drilling. Jurnal Tribologi, 17. 93 - 103.

Ibrahim, R. E. and Rosmamuhamadani, R. and Talari, M. K. and Md Yahaya, Sabrina and Sulaiman, Shamsuddin and Ismail, Mohd Idris Shah (2018) Corrosion behaviour of Al-Si cast alloy reinforced with titanium diboride (TiB2) and scandium (Sc). Journal of Engineering and Science Research, 2 (2). pp. 1-8. ISSN 2289-7127

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2018) Effects of nozzle die angle on extruding polymethylmethacrylate in open-source 3D printing. Journal of Computational and Theoretical Nanoscience, 15 (2). 663 - 665. ISSN 1546-1955; ESSN: 1546-1963

Dehghan, Shayan and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah (2018) Experimental investigation on friction drilling of titanium alloy. Engineering Solid Mechanics, 6 (2). 135 - 142. ISSN 2291-8744; ESSN: 2291-8752

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2018) Kriging-assisted robust black-box simulation optimization in direct speed control of DC motor under uncertainty. IEEE Transactions on Magnetics, 54 (7). pp. 1-9. ISSN 0018-9464

Ismail, Mohd Idris Shah and Buang, Ahmad Salleh (2018) Precision joining of steel-aluminum hybrid structure by clinching process. Journal of Advanced Manufacturing Technology, 12 (1). 25 - 36. ISSN 1985-3157

Ismail, Mohd Idris Shah and Bahari, Mariyam Jameelah and Shuib, Norsyafiqah (2018) Thermal deformation of gas metal arc welding on aluminum alloy t-joints. Engineering Solid Mechanics, 6 (1). 21 - 26. ISSN 2291-8744; ESSN: 2291-8752

Ibrahim, R.E. and Ramli, Rosmamuhamadani and Talari, Mahesh Kumar and M. Yahaya, Sabrina and Sulaiman, Sreenivasan and Ismail, Mohd Idris Shah (2017) Preliminary study on properties of aluminium-silicon (Al-Si) alloys reinforced by in situ titanium diboride (TiB2). Key Engineering Materials, 737. pp. 11-15. ISSN 1013-9826; ESSN: 1662-9795

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2017) An overview on robust design hybrid metamodeling: Advanced methodology in process optimization under uncertainty. International Journal of Industrial Engineering Computations, 9 (1). pp. 1-32. ISSN 1923-2926; ESSN: 1923-2934

Sukindar, Nor Aiman and Ariffin, M. K. A. and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Analyzing the effect of nozzle diameter in fused deposition modeling for extruding polylactic acid using open source 3D printing. Jurnal Teknologi, 78 (10). pp. 7-15. ISSN 0127–9696; ESSN: 2180–3722

Ramli, Rosmamuhamadani and Sulaiman, Shamsuddin and Hanim, Mohamed Ariff Azmah and Ismail, Mohd Idris Shah and Talari, Mahesh (2016) Mechanical and microstructure characterization of aluminium-copper (Al-Cu) reinforced with in situ titanium diboride (TiB2). Key Engineering Materials, 673. pp. 117-125. ISSN 1013-9826; ESSN: 1662-9795

Ismail, Mohd Idris Shah and Okamoto, Yasuhiro and Okada, Akira (2016) Thermo-mechanical analysis on thermal deformation of thin stainless steel in laser micro-welding. International Journal of Manufacturing, Materials, and Mechanical Engineering, 6 (2). pp. 51-66. ISSN 2156-1680; ESSN: 2156-1672

Imhan, Khalil Ibraheem and Baharudin, B. T. H. T. and Zakaria, Azmi and Ismail, Mohd Idris Shah and Hadi Alsabti, Nasser Mahdi and Ahmad, Ahmad Kamal (2016) The impact of tube diameter and thickness on laser tube bending process. Buletin Optik, 3. pp. 35-40. ISSN 2504-8546

Hozoorbakhsh, Asghar and Ismail, Mohd Idris Shah and Abd. Aziz, Nuraini (2015) A computational analysis of heat transfer and fluid flow in high-speed scanning of laser micro-welding. International Communications in Heat and Mass Transfer, 68. pp. 178-187. ISSN 0735-1933

Ramli, Rosmamuhamadani and Sulaiman, Shamsuddin and Ismail, Mohd Idris Shah and Mohamed Ariff, Azmah Hanim and Talari, Mahesh Kumar (2015) Wear properties of metal matrix composites Al-Cu and Al-Cu-TiB2. Materials Science Forum, 819. pp. 268-273. ISSN 0255-5476; ESSN: 1662-9752

Mohid, Zazuli and Md. Warap, Norizan and Ismail, Mohd Idris Shah and Ibrahim, Rasidi and Abdul Rahim, Erween (2014) Determination of heat flux intensity distribution and laser absorption rate of AISI D2 tool steel. Applied Mechanics and Materials, 465-466. pp. 730-734. ISSN 1660-9336; ESSN: 1662-7482

Mohid, Zazuli and Md. Warap, Norizan and Hassan, Suhaimi and Ismail, Mohd Idris Shah and Ibrahim, Rasidi and Abdul Rahim, Erween (2014) Numerical analysis of laser heating for laser assisted micro milling application. Applied Mechanics and Materials, 465-466. pp. 720-724. ISSN 1660-9336; ESSN: 1662-7482

Ismail, Mohd Idris Shah and Taha, Zahari (2014) Surface hardening of tool steel by plasma arc with multiple passes. International Journal of Technology, 5 (1). pp. 79-87. ISSN 2086-9614

Ismail, Mohd Idris Shah and Okamoto, Yasuhiro and Okada, Akira and Uno, Yoshiyuki and Mukhtar, Muhaizad (2013) Micro-Welding Of High Thermal Conductive Material Aluminum-Graphite Composite By Pulsed ND:YAG Laser. Journal of Laser Micro / Nanoengineering, 8 (1). pp. 90-96. ISSN 1880-0688

Ismail, Mohd Idris Shah and Okamoto, Yasuhiro and Okada, Akira (2013) Neural network modeling for prediction of weld bead geometry in laser microwelding. Advances in Optical Technologies, 2013. art. no. 415837. pp. 1-7. ISSN 1687-6393; ESSN: 1687-6407

Ismail, Mohd Idris Shah and Taha, Zahari and Abdul Shukor, Mohd Hamdi (2012) Experimental design and performance analysis in plasma arc surface hardening. Jurnal Teknologi, 57. pp. 57-75. ISSN 0127–9696; ESSN: 2180–3722

Ramli, Rosmamuhamadani and Azhar, Nurul Humaira and Talari, Mahesh Kumar and Md Yahaya, Sabrina and Sulaiman, Shamsuddin and Ismail, Mohd Idris Shah (2017) Mechanical properties of titanium-hydroxyapatite (Ti-HA) composite coating on stainless steel prepared by thermal spraying. In: 3rd Electronic and Green Materials International Conference 2017 (EGM 2017), 29-30 Apr. 2017, Krabi, Thailand. (pp. 1-5).

Ramli, Rosmamuhamadani and Sulaiman, Shamsuddin and Mohamed Ariff, Azmah Hanim and Ismail, Mohd Idris Shah and Talari, Mahesh Kumar and Md Yahaya, Sabrina (2016) Corrosion characterisation of Al-Cu reinforced in-situ TiB2. In: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016), 1-2 May 2016, Phuket, Thailand. (pp. 1-7).

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Evaluation on the process parameters influencing the surface texture using open-source 3D printing. In: International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016), 28-30 Aug. 2016, Kuala Lumpur, Malaysia. (pp. 127-128).

Abdul Rahim, Erween and Md. Warap, Norizan and Mohid, Zazuli and Ibrahim, Rasidi and Ismail, Mohd Idris Shah (2014) Numerical analysis of laser preheating for laser assisted micro milling of Inconel 718. In: International Integrated Engineering Summit (IIES 2014), 1-4 Dec. 2014, Dewan Sultan Ibrahim, Universiti Tun Hussein Onn Malaysia. .