Items where Author is "Hamouda, Abdel Magid Salem"
![]() | Up a level |
Group by: Item Type | No Grouping
Number of items: 38.
Mahdi, E. and Faraj, Munir and Hamouda, Abdel Magid Salem and Salit, Mohd Sapuan and Attia Hussein, Mohamed Ali and E. O., Eltai
(2020)
Effect of hexagonal on the in-plane crushing behaviour of plain weave composite hexagonal quadruple ring system.
International Journal of Crashworthiness, 25 (2).
192 - 202.
ISSN 1358-8265; ESSN: 1573-8965
Mohamed, Al Mabruk S. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Hamouda, Abdel Magid Salem and Baharudin, B. T. Hang Tuah
(2012)
Modeling the technology transfer process in the petroleum industry: evidence from Libya.
Mathematical and Computer Modelling, 55 (3-4).
pp. 451-570.
ISSN 0895-7177; ESSN: 1872-9479
Eslamian, Saeed and Sahari, Barkawi and Ali, Aidy and Mahdi, Elsadig and Hamouda, Abdel Magid Salem
(2011)
Microscopic study of 5083-H321 aluminium alloy under fretting fatigue condition.
IOP Conference Series: Materials Science and Engineering, 17 (1).
art. no. 012026.
pp. 1-11.
ISSN 1757-8981; ESSN: 1757-899X
Mohamed, Al Mabruk S. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Hamouda, Abdel Magid Salem and Baharudin, B. T. Hang Tuah
(2010)
Modeling technology transfer for petroleum industry in
Libya: an overview.
Scientific Research and Essays, 5 (2).
art. no. 78C57A216546.
pp. 130-147.
ISSN 1992-2248
Hasan, Ali T. and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Aris, Ishak and Marhaban, Mohammad Hamiruce and Al-Assadi, Hayder M. A. Ali
(2010)
Artificial neural network-based kinematics Jacobian solution for serial manipulator passing through singular configurations.
Advances in Engineering Software, 41 (2).
pp. 359-367.
ISSN 0965-9978
A. Perumal, Puvanasvaran and Megat Ahmad, Megat Mohamad Hamdan and Tang, Sai Hong and Muhamad, Mohd Razali and Hamouda, Abdel Magid Salem
(2010)
Lean process management implementation through enhanced problem solving capabilities.
Journal of Industrial Engineering and Management, 3 (3).
pp. 447-493.
ISSN 2013-8423; ESSN: 2013-0953
Bayat, Mehdi and Saleem, Muhammad and Sahari, Barkawi and Hamouda, Abdel Magid Salem and Mahdi, Elsadig
(2009)
Mechanical and thermal stresses in a functionally graded rotating disk with variable thickness due to radially symmetry loads.
International Journal of Pressure Vessels and Piping, 86 (6).
pp. 357-372.
ISSN 0308-0161
A. Perumal, Puvanasvaran and Megat Ahmad, Megat Mohamad Hamdan and Tang, Sai Hong and Muhamad, Mohd Razali and Hamouda, Abdel Magid Salem
(2009)
Lean behavior in implementing lean process management.
Journal of Applied Sciences Research, 5 (8).
pp. 930-943.
ISSN 1816-157X
A. Perumal, Puvanasvaran and Tay, C. H. and Megat Ahmad, Megat Mohamad Hamdan and Tang, Sai Hong and Mohd Yusuff, Rosnah and Muhamad, Mohd Razali and Hamouda, Abdel Magid Salem
(2009)
Leanness achievement through people development system in implementing lean process management.
American Journal of Engineering and Applied Sciences, 2 (1).
pp. 105-119.
ISSN 1941-7020; ESSN: 1941-7039
Sahari, Barkawi and Abu Mansor, Siti Marhainis and Wong, Shaw Voon and Hamouda, Abdel Magid Salem and Ahmad, Mohd Fauzy and Abdul Rahman, Jasmi and Khalid, Yousif A.
(2009)
Static stiffness and stress distribution of gasoline and natural gas vehicle platforms subjected to torsion loads.
European Journal of Scientific Research, 30 (2).
pp. 272-281.
ISSN 1450-216X; ESSN: 1450-202X
Bayat, Mehdi and Sahari, Barkawi and Saleem, Muhammad Azhar and Hamouda, Abdel Magid Salem and Reddy, Junuthula N.
(2009)
Thermo elastic analysis of functionally graded rotating disks with temperature-dependent material properties: uniform and variable thickness.
International Journal of Mechanics and Materials in Design, 5 (3).
pp. 263-279.
ISSN 1569-1713; ESSN: 1573-8841
Hasan, Ali T. and Hamouda, Abdel Magid Salem and Ismail, Napsiah and Aris, Ishak and Marhaban, Mohammad Hamiruce
(2009)
Trajectory tracking for a serial robot manipulator passing through singular configurations based on the adaptive kinematics Jacobian method.
Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 223 (3).
393 - 415.
Mohamed, Al Mabruk S. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Hamouda, Abdel Magid Salem and Baharudin, B. T. Hang Tuah
(2009)
The effect of technology transfer factors on performance: an empirical study of Libyan petroleum industry.
American Journal of Applied Sciences, 6 (9).
pp. 1763-1769.
ISSN 1546-9239; ESSN: 1554-3641
Ismail, Napsiah and Musharavati, Farayi and Hamouda, Abdel Magid Salem and Ramli, Abdul Rahman
(2008)
Manufacturing process planning optimisation in reconfigurable multiple parts flow lines.
Journal of Achievements in Materials and Manufacturing Engineering, 31 (2).
pp. 671-677.
ISSN 1734-8412
Sahari, Barkawi and Arsad, N. M. and Hamouda, Abdel Magid Salem and Wong, Shaw Voon and Ahmad, M. F.
(2008)
The Effect of Ribs on Behavior of Natural Gas Vehicle Platform Backbone with Stamping Consideration.
In: 13th International Conference on Applied Mechanics and Mechanical Engineering., 27-29 May, 2008, Military Technical College Kobry El-Kobbah, Cairo, Egypt.. (pp. 67-78).
A. Perumal, Puvanasvaran and Tan, B. H. and Megat Ahmad, Megat Mohamad Hamdan and Tang, Sai Hong and Muhamad, Mohd Razali and Hamouda, Abdel Magid Salem
(2008)
Degree of leanness and managerial commitment in an aerospace company.
Journal of Statistics & Management System, 11 (4).
pp. 653-673.
ISSN 0972-0510; ESSN: 2169-0014
Sahari, Barkawi and Azni, Muhammad Mujahid and Wong, Shaw Voon and Ahmad, Mohd Fauzy and Khalid, Yousif A. and Hamouda, Abdel Magid Salem
(2008)
Finite element lateral crash analysis of front natural gas vehicle platform with tank mounting structure.
International Journal of Vehicle Safety, 3 (2).
pp. 135-148.
ISSN 1479-3105; ESSN: 1479-3113
Arshad, Haslina and Hamouda, Abdel Magid Salem and Ismail, Napsiah and Sulaiman, Riza
(2008)
Virtual reality as a training tool in engineering education.
World Review of Science, Technology and Sustainable Development, 5 (3/4).
pp. 389-401.
ISSN 1741-2242; ESSN: 1741-2234
A. Perumal, Puvanasvaran and Muhamad, Mohd Razali and Megat Ahmad, Megat Mohamad Hamdan and Tang, Sai Hong and Hamouda, Abdel Magid Salem
(2008)
A review of problem solving capabilities in lean process management.
American Journal of Applied Sciences, 5 (5).
pp. 504-511.
ISSN 1546-9239; ESSN: 1554-3641
Hamouda, Abdel Magid Salem and Sulaiman, Shamsuddin and Vijayaram, Thoguluva Raghavan and Sayuti, M. and Megat Ahmad, Megat Mohamad Hamdan
(2007)
Processing and characterisation of particulate reinforced aluminium silicon matrix composite.
Journal of Achievements in Materials and Manufacturing Engineering, 25 (2).
pp. 11-16.
ISSN 1734-8412
Wong Shaw Voon
(2006)
Pendulum impact test rig.
UNSPECIFIED.
Tan, Kean Sheng and Wong, Shaw Voon and Radin Sohadi, Radin Umar and Hamouda, Abdel Magid Salem and Megat Ahmad, Megat Mohamad Hamdan
(2006)
Experimental study on energy absorption characteristics of motorcycle front wheel—tyre assembly in frontal impact.
International Journal of Crashworthiness, 11 (2).
pp. 131-142.
ISSN 1358-8265; ESSN: 1754-2111
Biliyamin, Ibitoye Adeoye and Hamouda, Abdel Magid Salem and Wong, Shaw Voon and Radin Sohadi, Radin Umar
(2006)
Simulation of motorcyclist's kinematics during impact with W-Beam guardrail.
Advances in Engineering Software, 37 (1).
pp. 56-61.
ISSN 0965-9978
Abd Manaf, Ismanizam and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Wong, Shaw Voon
(2005)
Complex parts surface modelling from laser scanning data.
In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6-8 Dec. 2005, Putrajaya, Malaysia. .
Abdullah, Ahmad Baharuddin and Hamouda, Abdel Magid Salem
(2005)
Development of an integrated CAD/CAE/CAM system for forging process: a proposal.
In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6-8 Dec. 2005, Putrajaya, Malaysia. .
Tarlochan, Faris and Hamouda, Abdel Magid Salem and Sahari, Barkawi and Saad, Elsadig Mahdi Ahmed
(2005)
Edgewise compression of composite sandwich panels: effect of core hybridization.
In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. (pp. 9-16).
Talebi, Hossein and Hamouda, Abdel Magid Salem
(2005)
Numerical modeling of ballistic impact and penetration: computational aspects and challenges.
In: International Advanced Technology Congress: Conference on Spatial and Computational Engineering, 6-8 Dec. 2005, Putrajaya, Malaysia. .
Bayat, Mehdi and Hamouda, Abdel Magid Salem and Mahdi , E.
(2005)
On the thermoelastic functionally graded material of ceramic-metal plate.
In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 584-592).
Musharavati, F. and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Ramli, Abdul Rahman
(2005)
An analytical hierarchical process approach for evaluating configuration performance in reconfigurable manufacturing systems.
In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6 - 8 Dec. 2005, Putrajaya, Malaysia. .
Lim, Y. P. and Sulaiman, Shamsuddin and Hamouda, Abdel Magid Salem and Megat Ahmad, Megat Mohamad Hamdan
(2005)
The combined effect of Al-5Ti-1B and Al-10Sr on the metallurgical properties of LM6 Al-Si sand castings.
In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 394-407).
Lim, Y. P. and Sulaiman, Shamsuddin and Hamouda, Abdel Magid Salem and Megat Ahmad, Megat Mohamad Hamdan
(2005)
An experimental investigation on LM6 AL-SI alloy sand casting to study the correlation between metallurgical properties and solidification rate.
In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 169-180).
Musharavati, Farayi and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Ramli, Abd. Rahman
(2005)
A neural network based control strategy for reconfigurable manufacturing systems.
In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .
Asgari, Seyed Alireza and Hamouda, Abdel Magid Salem and Mansor, Shattri and Singh, Harwant and Mahdi, Elsadig and O. K. Rahmat, Rahmita Wirza and Prakash, Bernard
(2004)
Finite element modeling of a generic stemless hip implant design in comparison with conventional hip implants.
Finite Elements in Analysis and Design, 40 (15).
pp. 2027-2047.
ISSN 0168-874X; ESSN: 1872-6925
Radin Umar Radin Sohadi
(2003)
Motorcycle helmet for children.
UNSPECIFIED.
Idris, Jamaliah and Hamouda, Abdel Magid Salem
(2000)
Advanced materials and nanotechnology.
In: Proceedings of Advanced Technology Forum : Frontiers of Knowledge for Industrial Excellence, 7-8 Nov. 2000, Shah Alam, Selangor. (pp. 53-60).
Hamouda, Abdel Magid Salem and Tan, Jo Pei
(2000)
Development of virtual classroom for interactive education on the web.
In: Towards Digital University Conference , 16-17 May 2000, UPM, Serdang, Selangor. .
(Unpublished)
Sulaiman, Shamsuddin and Hamouda, Abdel Magid Salem
(1999)
Finite element modelling of casting process.
Research Report.
The Research Unit, Universiti Putra Malaysia, Serdang, Selangor.
Hamouda, Abdel Magid Salem and Sulaiman, Shamsuddin and Hashmi, M. S. J.
(1996)
Fast upsetting of circular cylinders of aluminium metal matrix composites: experimental results and numerical analysis.
Journal of Materials Processing Technology, 60 (1-4).
pp. 723-727.
ISSN 0924-0136; ESSN: 1873-4774