Items where Author is "Abang Abdul Majid, Dayang Laila"

Karunakaran, Sivasanghari and Abang Abdul Majid, Dayang Laila and Imran, Husam Yahya (2024) Superelasticity behaviour of NiTi actuator at different strain rates. Journal of Aeronautics, Astronautics and Aviation, 56 (1). pp. 107-115. ISSN 1990-7710

Imran, Husam Yahya and Abang Abdul Majid, Dayang Laila and Abdul Hamid, Mohd Faisal and Abdullah, Ermira Junita and Mohammed, Saleem Ethaib and Karunakaran, Sivasanghari (2024) Thermomechanical performance of shape memory alloy spring by homogeneous distribution of temperature. Journal of Aeronautics, Astronautics and Aviation, 56 (1s). pp. 177-124. ISSN 1990-7710

Karunakaran, Sivasanghari and Abang Abdul Majid, Dayang Laila and Jaafar, Che Nor Aiza and Ismail, Muhammad Hussain and Imran, Husam Yahya (2022) Heating techniques of Shape Memory Alloy (SMA) - a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 99 (2). 207 - 220. ISSN 2289-7879

Mazlan, Shahan and Yidris, Noorfaizal and Zahari, R. and Gries, E. and Abang Abdul Majid, Dayang Laila and Ahmad, Kamarul Arifin (2020) Prediction of fatigue life of aluminum 2024-T3 at low temperature by finite element analysis. Journal of Mechanical Engineering and Sciences, 14 (3). 7170 - 7180. ISSN 2289-4659; ESSN: 2231-8380

Razzaq, Alaa Mohammed and Abang Abdul Majid, Dayang Laila and Ishak, Mohamad Ridzwan and Al-Naib, Uday Muwafaq Basheer (2020) Mathematical modeling and analysis of tribological properties of AA6063 aluminum alloy reinforced with fly ash by using response surface methodology. Crystals, 10 (5). art. no. 403. pp. 1-17. ISSN 2073-4352

Hashim, Nurain and Abang Abdul Majid, Dayang Laila and Mahdi, El-Sadig and Zahari, Rizal and Yidrisa, Noorfaizal (2019) Effect of fiber loading directions on the low cycle fatigue of intraply carbon- Kevlar reinforced epoxy hybrid composites. Composite Structures, 212. pp. 476-483. ISSN 0263-8223; ESSN: 1879-1085

Abdullah, Ermira Junita and Gaikwad, Priyanka Subhash and Abang Abdul Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine (2019) Effect of sensor location of smart composite plate system on feedback control performance. Electronics Science Technology and Application, 6 (1). pp. 1-13. ISSN 2251-2608; ESSN: 2424-8460

Baitab, Danish Mahmood and Abang Abdul Majid, Dayang Laila and Abdullah, Ermira Junita and Abdul Hamid, Mohd Faisal (2019) Improving the stiffness of multilayer 3D woven composites by the integration of shape memory alloys (SMAs) into structures. The Journal of The Textile Institute, 111 (9). pp. 1371-1379. ISSN 1754-2340; ESSN: 0040-5000

Abdullah, Ermira Junita and Gaikwad, Priyanka Subhash and Azid, N. and Abang Abdul Majid, Dayang Laila and Mohd. Rafie, Azmin Shakrine (2018) Temperature and strain feedback control for shape memory alloy actuated composite plate. Sensors and Actuators A: Physical, 283. 134 - 140. ISSN 0924-4247

Wan Draman, Wan Nur A'tiqah and Abang Abdul Majid, Dayang Laila and Ishak, Muhammad Ikman and Rosli, M. U. and M., Lailina N. and Ismail, Ras Izzati (2017) An auto lifting device to lift manhole cover with ergonomics consideration. AIP Conference Proceedings, 1885 (1). art. no. 020067. ISSN 0094-243X; ESSN: 1551-7616

Norizan, Mohd Nurazzi and Abdan, Khalina and Salit, Mohd Sapuan and Abang Abdul Majid, Dayang Laila and Mohamed, Rahmah and Zin, Mohd Hanafee (2017) A review: fibres, polymer matrices and composites. Pertanika Journal of Science & Technology, 25 (4). pp. 1085-1102. ISSN 0128-7680; ESSN: 2231-8526

Ibraheem, Sameer Adnan and Sreenivasan, Subramania Sarma and Abdan, Khalina and A. Sulaiman, Shamsuddin and Ali, Aidy and Abang Abdul Majid, Dayang Laila (2016) The effects of combined chemical treatments on the mechanical properties of three grades of sisal. BioResources, 11 (4). pp. 8968-8980. ISSN 1930-2126

Abdullah, Ermira Junita and Abang Abdul Majid, Dayang Laila and Romli, Fairuz Izzudin and Gaikwad, Priyanka Subhash and Lim, Gui Yuan and Harun, Nurul Fareha (2015) Active control of strain in a composite plate using shape memory alloy actuators. International Journal of Mechanics and Materials in Design, 11 (1). pp. 25-39. ISSN 1569-1713; ESSN: 1573-8841

Zakikhani, Parnia and Zahari, Rizal and Hameed Sultan, Mohamed Thariq and Abang Abdul Majid, Dayang Laila (2014) Extraction and preparation of bamboo fibre-reinforced composites. Materials and Design, 63. pp. 820-828. ISSN 0264-1275; ESSN: 1873-4197

Abang Abdul Majid, Dayang Laila and Che Saffry, Zetty Azleen and Abdullah, Ermira Junita and Mustapha, Faizal and Mohamed Haidzir, Noor Hazira (2014) Operational modal testing of cantilevered composite plate in subsonic flow. Journal of Vibroengineering, 16 (7). pp. 3523-3533. ISSN 1392-8716

Marimuthu, Navanitha and Abdullah, Ermira Junita and Abang Abdul Majid, Dayang Laila and Romli, Fairuz Izzudin (2014) Conceptual design of flapping wing using shape memory alloy actuator for micro unmanned aerial vehicle. Applied Mechanics and Materials, 629. pp. 152-157. ISSN 1660-9336; ESSN: 1662-7482

Mohd Aris, Khairul Dahri and Mustapha, Faizal and Salit, Mohd Sapuan and Abang Abdul Majid, Dayang Laila (2014) Condition Structural Index using Principal Component Analysis for undamaged, damage and repair conditions of carbon fiber-reinforced plastic laminate. Journal of Intelligent Material Systems and Structures, 25 (5). pp. 575-584. ISSN 1045-389X; ESSN: 1530-8138

Baharudin, Elfarizanis and Ismail, Alyani and Alhawari, Adam Reda Hasan and Zainudin, Edi Syams and Abang Abdul Majid, Dayang Laila and Che Seman, Fauziahanim (2014) Investigation on the dielectric properties of pulverized oil palm frond and pineapple leaf fiber for X-band microwave absorber application. Advanced Materials Research, 893. pp. 488-491. ISSN 1022-6680; ESSN: 1662-8985

Mohd Jamal, Qistina and Abang Abdul Majid, Dayang Laila and Mohd Haris, Mohd Yusoff and Yidris, Noorfaizal and Hameed Sultan, Mohamed Thariq (2014) Quasi static analysis of a biocomposite aircraft radome. Applied Mechanics and Materials, 629. pp. 78-81. ISSN 1660-9336; ESSN: 1662-7482

Djojodihardjo, Harijono and Abdul Hamid, Mohd Faisal and Jaafar, Abdul Aziz and Basri, Shahnor and Romli, Fairuz Izzudin and Mustapha, Faizal and Mohd Rafie, Azmin Shakrine and Abang Abdul Majid, Dayang Laila (2013) Computational study on the aerodynamic performance of wind turbine airfoil fitted with Coandă jet. Journal of Renewable Energy, 2013. art. no. 839319. pp. 1-17. ISSN 2314-4386; ESSN: 2314-4394

Zahari, Rizal and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine and Hameed Sultan, Mohamed Thariq (2012) Geometric non-linear analysis of composite laminated plates using higher order finite strip element. Applied Mechanics and Materials, 225. pp. 165-171. ISSN 1660-9336; ESSN: 1662-7482

Hameed Sultan, Mohamed Thariq and Basri, Shahnor and Mohd Rafie, Azmin Shakrine and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Mohd Ajir, Mohd Ramly (2012) High velocity impact damage analysis for glass epoxy - laminated plates. Advanced Materials Research, 399-401. pp. 2318-2328. ISSN 1022-6680; ESSN: 1662-8985

Zahari, Rizal and Kamarulazizi, Sulaiman and Abang Abdul Majid, Dayang Laila (2012) Tensile behaviour of unbalanced woven C-glass/epoxy composite laminated plate with and without circular cutouts. Jurnal Mekanikal, 34. pp. 57-65. ISSN 2289-3866; ESSN: 2289-3873

Shahrjerdi, Ali and Mustapha, Faizal and Bayat, Mehdi and Salit, Mohd Sapuan and Abang Abdul Majid, Dayang Laila (2011) Fabrication of functionally graded Hydroxyapatite-Titanium by applying optimal sintering procedure and powder metallurgy. International Journal of Physical Sciences, 6 (9). pp. 2258-2267. ISSN 1992-1950

Abang Abdul Majid, Dayang Laila and Ahmad, Zuraida and Anuar, Hazleen and Halim, Zahurin and Md Yusof, Fauziah (2011) Cotton reinforced biopolymer matrix composite: Effect of ultraviolet on its mechanical properties. Key Engineering Materials, 471-47 (March). pp. 928-932. ISSN 1662-9795

Varatharajoo, Renuganth and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Zahari, Rizal and Kahle, Ralph (2011) Critical speeds for carbon/epoxy composite rotors in spacecraft energy storage applications. Key Engineering Materials, 471-472. pp. 37-42. ISSN 1013-9826; ESSN: 1662-9795

Abang Abdul Majid, Dayang Laila and Basri, Shahnor and Varatharajoo, Renuganth and Attaran, Abdolhamid (2011) Flutter analysis of a hybrid plate-like fiber-reinforced composite wing. Key Engineering Materials, 471-472. pp. 1107-1112. ISSN 1013-9826; ESSN: 1662-9795

Shahrjerdi, Ali and Mustapha, Faizal and Bayat, Mehdi and Abang Abdul Majid, Dayang Laila (2011) Free vibration analysis of solar functionally graded plates with temperature-dependent material properties using second order shear deformation theory. Journal of Mechanical Science and Technology, 25 (9). pp. 2195-2209. ISSN 1738-494X; ESSN: 1976-3824

Djojodihardjo, Harijono and Abang Abdul Majid, Dayang Laila and Romli, Fairuz Izzudin and Basri, Shahnor and Abdul Hamid, Mohd Faisal (2011) Numerical Simulation And Analysis Of Coanda Effect Circulation Control For Wind-Turbine Application Considerations. IIUM Engineering Journal. pp. 19-42. ISSN 1511-788X

Shahrjerdi, Ali and Mustapha, Faizal and Salit, Mohd Sapuan and Bayat, Mehdi and Abang Abdul Majid, Dayang Laila and Zahari, Rizal (2011) Optimal sintering procedure to fabrication of functionally graded Hydroxyapatite-Titanium. Key Engineering Materials, 471-472. pp. 140-144. ISSN 1013-9826; ESSN: 1662-9795

Ng, Wei Sim and Mustapha, Faizal and Varatharajoo, Renuganth and Zahari, Rizal and Abang Abdul Majid, Dayang Laila (2011) Parametric study on cohesive element for composite fuselage model. Key Engineering Materials, 471-472. pp. 1085-1090. ISSN 1013-9826; ESSN: 1662-9795

Haris, Mohd Yusoff and Abang Abdul Majid, Dayang Laila and Zainudin, Edi Syams and Mustapha, Faizal and Zahari, Rizal and Halim, Zahurin (2011) Preliminary review of biocomposites materials for aircraft radome application. Key Engineering Materials, 471-472. pp. 563-567. ISSN 1013-9826; ESSN: 1662-9795

Zahari, Rizal and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal and Varatharajoo, Renuganth and A. Rasid, Zainudin and Ayob, Amran (2011) Thermal buckling and post-buckling improvements of laminated composite plates using finite element method. Key Engineering Materials, 471-47 (5). pp. 536-541. ISSN 1013-9826

Shahrjerdi, Ali and Mustapha, Faizal and Salit, Mohd Sapuan and Bayat, Mehdi and Abang Abdul Majid, Dayang Laila and Zahari, Rizal (2011) Thermal free vibration analysis of temperature-dependent functionally graded plates using second order shear deformation. Key Engineering Materials, 471-472. pp. 133-139. ISSN 1013-9826; ESSN: 1662-9795

A. Rasid, Zainudin and Zahari, Rizal and Ayob, Amran and Abang Abdul Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine (2011) Thermal post-buckling improvements of laminated composite plates using the active strain energy tuning approach. Advanced Materials Research, 311-313. pp. 2235-2238. ISSN 1022-6680; ESSN: 1662-8985

Affandi, Nuraishah Bazilah and Mohd. Rafie, Azmin Shakrine and Basri, Shahnor and Romli, Fairuz Izzudin and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal (2011) A preliminary study on translational kinetic energy absorption using coconut-fiber (Coir) sheets as a potential impact-worthy constituent in advanced aerospace material. Key Engineering Materials, 471-472. pp. 1028-1033. ISSN 1013-9826; ESSN: 1662-9795

Mohd Aris, Khairul Dahri and Mustapha, Faizal and Salit, Mohd Sapuan and Abang Abdul Majid, Dayang Laila (2011) A structural health monitoring of a pitch catch active sensing of PZT sensor on normal, damage and repair aircraft spoiler. Key Engineering Materials, 471-472. pp. 1124-1129. ISSN 1013-9826; ESSN: 1662-9795

Yidris, Noorfaizal and Zahari, Rizal and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Mohd Rafie, Azmin Shakrine (2010) Crush simulation of woven c-glass/epoxy unmanned ariel vehicle fuselage section. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 260-267. ISSN 1823-0334

Mohd Rafie, Azmin Shakrine and Basri, Shahnor and Varatharajoo, Renuganth and Abang Abdul Majid, Dayang Laila and Mohamed Ariff, Azmah Hanim (2009) Aeroelastic analysis for Eagle 150b aircraft wing. International Review of Aerospace Engineering, 2 (4). pp. 185-191. ISSN 1973-7459; ESSN: 2533-2279

Basri, Shahnor and Fakir, Md. Moslemuddin and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Jaafar, Abdul Aziz (2009) Heat distribution in rectangular fins using efficient finite element and differential quadrature methods. Engineering, 1 (3). pp. 151-160. ISSN 1947-3931; ESSN: 1947-394X

Fakir, Md. Moslemuddin and Basri, Shahnor and Varatharajoo, Renuganth and Jaafar, Abdul Aziz and Mohd Rafie, Azmin Shakrine and Abang Abdul Majid, Dayang Laila (2008) Extended conventional finite element method vs. differential quadrature method comparison in two-dimensional heat transfer problem. International Review of Aerospace Engineering, 1 (2). pp. 200-205. ISSN 1973-7459; ESSN: 1973-7440

Fakir, Md. Moslemuddin and Basri, Shahnor and Varatharajoo, Renuganth and Jaafar, Abdul Aziz and Mohd Rafie, Azmin Shakrine and Abang Abdul Majid, Dayang Laila (2008) Comparison of optimum finite element method vs. differential quadrature method in two-dimensional heat transfer problem. International Review of Mechanical Engineering, 2 (3). ISSN 1970-8734; ESSN: 1970-8742

Abang Abdul Majid, Dayang Laila and Basri, Shahnor (2008) LCO flutter of cantilevered woven glass/epoxy laminate in subsonic flow. Acta Mechanica Sinica, 24 (1). pp. 107-110. ISSN 0567-7718; ESSN: 1614-3116

Ghamarian, Nima and Mohd Ariff, Azmah Hanim and Penjumras, Patpen and Abang Abdul Majid, Dayang Laila (2016) Effect of fiber orientation on the mechanical properties of laminated polymer composites. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Amsterdam. ISBN 9780128035818

Chok, Ellyna Yee Ling and Abang Abdul Majid, Dayang Laila (2017) Low cycle fatigue of hybrid woven kenaf fiber reinforced epoxy composite with 1% addition of silica aerogel. In: 4th Mechanical Engineering Research Day 2017 (MERD'17), 30 Mar. 2017, UTeM Library, Melaka. (pp. 413-414).

Karunakaran, S. and Abang Abdul Majid, Dayang Laila and Mohd Tawil, M. Lufti (2016) Flammability of self-extinguishing kenaf/ABS nanoclays composite for aircraft secondary structure. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-11).

Manan, Nor Hafizah and Abang Abdul Majid, Dayang Laila and Romli, Fairuz Izzuddin (2016) Mould design and manufacturing considerations of honeycomb biocomposites with transverse fibre direction for aerospace application. In: 6th Innovation in Aerospace Engineering and Technology (AEROTECH VI), 8-9 Nov. 2016, Kuala Lumpur, Malaysia. (pp. 1-7).

Hussein, A. M. H. and Abang Abdul Majid, Dayang Laila and Abdullah, Ermira Junita (2016) Shape memory alloy actuation effect on subsonic static aeroelastic deformation of composite cantilever plate. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-10).

Sabaruddin, Ainul Aniyah and Wiriadidjaja, Surjatin and Abang Abdul Majid, Dayang Laila and Djojodihardjo, Harijono and Ahmad, Mohamed Tarmizi (2012) Variable valve timing on piston engine for lightweight aircraft. In: AEROTECH-IV 2012-Recent Advances in Aerospace Technology, 21-22 Nov. 2012, Kuala Lumpur, Malaysia. .

Mohd Aris, Khairul Dahri and Mustapha, Faizal and Salit, Mohd Sapuan and Abang Abdul Majid, Dayang Laila (2012) A condition structural index (CSI) using principal component analysis (PCA) for normal, damage and repair conditions of CFRP laminate. In: International Conference on Advances in Structural Health Management and Composite Structures (ASHMCS 2012), 29-31 Aug. 2012, Jeonju, South Korea. (pp. 1-5).

Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Ng, Kooi Huat Novitect; a novelty detection soft-computing algorithm for Structural Health Monitoring (SHM) system. In: International Conference on Advances Science and Contemporary Engineering 2012 (ICASCE 2012), 21-26 Oct. 2012, Jakarta, Indonesia. (pp. 494-504).

Elsadiq Mahdi Ahmed Saad (2006) Crash-energy absorbing structure and method of fabrication. UNSPECIFIED.