Design of analog mixer for RF front-end

Citation

Go, Ai Mei and Jamuar, Sudhanshu Shekhar (2008) Design of analog mixer for RF front-end. In: 2008 IEEE Asia Pacific Conference on Circuits and Systems (APCCAS 2008), 30 Nov.-3 Dec. 2008, Macao, China. (pp. 1616-1619).

Abstract

This paper presents design of analog mixer using modified Gilbert cell topology for use in RF front. The proposed circuit gives improvement in its performance. The input RF and LO frequency is set to 2500MHz and 2250MHz respectively, resulting in an output IF frequency of 250MHz.The simulation results show that the conversion gain is 9.605dB, single-sideband noise figure is 9.448dB and output IM3 intercept point is 15.764dBm with power consumption of 24.732mW. It uses supply voltage of 1.8V and the circuit layout has been obtained using CMOS 0.18μm technology fabrication.

Download File

Text (Abstract)
Design of analog mixer for RF front-end.pdf
Download (46kB)

Additional Metadata

Item Type:	Conference or Workshop Item (Paper)
Divisions:	Faculty of Engineering
DOI Number:	https://doi.org/10.1109/APCCAS.2008.4746345
Publisher:	IEEE
Keywords:	Design of analog mixer; RF front
Depositing User:	Nabilah Mustapa
Date Deposited:	10 Aug 2020 02:24
Last Modified:	10 Aug 2020 02:24
Altmetrics:	http://www.altmetric.com/details.php?domain=psasir.upm.edu.my&doi=10.1109/APCCAS.2008.4746345
URI:	http://psasir.upm.edu.my/id/eprint/42906
Statistic Details:	View Download Statistic

Actions (login required)

View Item