Effect of cutting parameters on cutting temperature of TiAL6V4 alloy

Citation

Sulaiman, Shamsuddin and Roshan Zamir, Amir Sayah and Borazjani, Soroosh (2013) Effect of cutting parameters on cutting temperature of TiAL6V4 alloy. Applied Mechanics and Materials, 392. pp. 68-72. ISSN 1660-9336; ESSN: 1662-7482

Abstract

A Finite Element Modeling (FEM) and Simulation was Used to Investigate the Effect of Tool Rake Angle, Cutting Speed and Feed Rate on the Cutting Temperature of Tial6v4 Alloy. the Purpose of this Study was to Find Proper Cutting Parameters for Machining of Titanium Alloy where Cutting Temperature was Lowest. A FEM Based on ABAQUS Software which Involves Jonson-Cook Material Model and Coulomb’s Friction Law was Applied to Simulate an Orthogonal Cutting Process. in this Simulation Work, a Range of Tool Rake Angle from 0° to 10°, a Range of Cutting Speed from 300 m/min to 600 m/min and a Range of Feed Rate between 0.1 Rev/mm and 0.25 Rev/mm were Investigated. the Simulation Results Indicated that Increase in Rake Angle Reduces Cutting Temperature while Increasing Cutting Speed and Feed Rate Increase the Cutting Temperature.

Download File

Preview

PDF (Abstract)
Effect of cutting parameters on cutting temperature of TiAL6V4 alloy.pdf
Download (149kB) | Preview

Official URL or Download Paper: http://www.scientific.net/AMM.392.68

Additional Metadata

Item Type:	Article
Divisions:	Faculty of Engineering
DOI Number:	https://doi.org/10.4028/www.scientific.net/AMM.392.68
Publisher:	Trans Tech Publications
Keywords:	Finite element modeling; Rake angle; Titanium alloy
Depositing User:	Muizzudin Kaspol
Date Deposited:	27 May 2014 08:35
Last Modified:	03 Feb 2016 03:27
Altmetrics:	http://www.altmetric.com/details.php?domain=psasir.upm.edu.my&doi=10.4028/www.scientific.net/AMM.392.68
URI:	http://psasir.upm.edu.my/id/eprint/28614
Statistic Details:	View Download Statistic

Actions (login required)

View Item