UPM Institutional Repository

Items where Author is "Sahari, Barkawi "

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 101.

Article

Sahari, Barkawi and Abdul Aziz, Nuraini and J. M., Nursherida and A., Manohar and I. A., Rafukka (2020) On child head injury criteria (HIC) and stress due to frontal fall impact on rigid floor. International Journal of Advanced Research in Engineering Innovation, 2 (1). pp. 1-10. ISSN 2682-8499

Shehan, Muna Khalil and Sahari, Barkawi and Abdul Jalil, Nawal Aswan and Tang, Sai Hong and As'arry, Azizan (2020) Dynamic analysis of an optimal active suspension system us-ing global search optimization. International Journal of Engineering and Technology Innovation, 7 (3 spec. 17). 43 - 46. ISSN 2223-5329; ESSN: 2226-809X

Masuri, Siti Ujila and Hairuddin, Abdul Aziz and Muhssen, Hassan Sadah and Sahari, Barkawi (2019) Computational fluid dynamics investigation of air-gas pre mixing controller mixer designed for CNG-diesel dual-fuel engines. CFD Letters, 11 (6). pp. 47-62. ISSN 2180-1363

Mahmood, Hussein Adel and Adam, Nor Mariah and Sahari, Barkawi and Masuri, Siti Ujila (2018) Development of a particle swarm optimisation model for estimating the homogeneity of a mixture inside a newly designed CNG-H2-AIR mixer for a dual fuel engine: an experimental and theoretic study. Fuel, 217. pp. 131-150. ISSN 0016-2361; ESSN: 1873-7153

Mahmood, Hussein Adel and Adam, Nor Mariah and Sahari, Barkawi and Masuri, Siti Ujila (2017) Design of compressed natural gas-air mixer for dual fuel engine using three-dimensional computational fluid dynamics modeling. Journal of Computational and Theoretical Nanoscience, 14 (7). pp. 3125-3142. ISSN 1546-1955; ESSN: 1546-1963

Shehan, Muna Khalil and Sahari, Barkawi and Abdul Jalil, Nawal Aswan and Tang, Sai Hong and As'arry, Azizan (2017) System optimization algorithm for 3DOF quarter car active suspension. International Journal of Vehicle Structures and Systems, 9 (3). pp. 172-176. ISSN 0975-3060; ESSN: 0975-3540

Jalaluddin, Mai Nursherida and Sahari, Barkawi and Abdul Aziz, Nuraini and Arumugam, Manohar (2016) Development and validation of newborn child head numerical model dummy for impact simulations. International Journal of Electronics and Electrical Engineering, 4 (6). pp. 563-568. ISSN 2301-380X

Rafukka, Ibrahim Abdullahi and Sahari, Barkawi and Abdul Aziz, Nuraini and Arumugam, Manohar (2016) Anthropometric comparison of three-year-old Nigerian child and crash dummies. Journal of Transportation Technologies, 6 (4). pp. 192-199. ISSN 2160-0473; ESSN: 2160-0481

Rafukka, Ibrahim Abdullahi and Sahari, Barkawi and Abdul Aziz, Nuraini and Arumugam, Manohar (2016) Child dummy finite element models development: a review. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6649-6656. ISSN 1819-6608

Mohd Salleh, Salwani and Ali, Aidy and Sahari, Barkawi and Abdul Aziz, Nuraini (2016) Effect of automotive side member materials on the head injury criteria (HIC) and chest severity index (CSI) of adult passenger. International Journal of Engineering and Technologies, 7. pp. 47-59. ISSN 2297-623X

Rafukka, Ibrahim Abdullahi and Sahari, Barkawi and Abdul Aziz, Nuraini and Arumugam, Manohar (2016) A modified hybrid III 6-year-old dummy head model for lateral impact assessment. International Journal of Vehicular Technology, 2016. art. no. 1768512. pp. 1-8. ISSN 1687-5702; ESSN: 1687-5710

Mohd Salleh, Salwani and Sahari, Barkawi and Ali, Aidy and Abdul Aziz, Nuraini (2015) Assessment of head injury criteria and chest severity index for frontal impact. Journal of Mechanical Engineering and Sciences, 8. pp. 1376-1382. ISSN 2289-4659; ESSN: 2231-8380

Abu Mansor, Siti Marhainis and Abd. Aziz, Nuraini and Mohamed Ariff, Azmah Hanim and Sahari, Barkawi (2015) Axial crushing of thin-walled structure with crease lines. Australian Journal of Basic and Applied Sciences, 9 (19). pp. 20-26. ISSN 1991-8178

Mohd Salleh, Salwani and Sahari, Barkawi and Ali, Aidy and Abdul Aziz, Nuraini (2014) The effect of automotive side member filling on car frontal impact performance. Journal of Mechanical Engineering and Sciences, 6. pp. 873-880. ISSN 2289-4659; ESSN: 2231-8380

Bahraminasab, Marjan and Sahari, Barkawi and Edwards, Kevin L. and Farahmand, Farzam and Jahan, Ali and Tang, Sai Hong and Arumugam, Manohar (2014) On the influence of shape and material used for the femoral component pegs in knee prostheses for reducing the problem of aseptic loosening. Materials and Design, 55 . pp. 416-428. ISSN 0264-1275; ESSN: 1873-4197

Bahraminasab, Marjan and Sahari, Barkawi and Edwards, Kevin L. and Farahmand, Farzam and Tang, Sai Hong and Arumugam, Manohar and Jahan, Ali (2014) Multi-objective design optimization of functionally graded material for the femoral component of a total knee replacement. Materials and Design, 53 . pp. 159-173. ISSN 0264-1275; ESSN: 1873-4197

Kwong, Qi Jie and Adam, Nor Mariah and Sahari, Barkawi (2014) Thermal comfort assessment and potential for energy efficiency enhancement in modern tropical buildings: a review. Energy and Buildings, 68 (pt. A). pp. 547-557. ISSN 0378-7788; ESSN: 1872-6178

Lilehkoohi, A. H. and Abdul Aziz, Faieza and Sahari, Barkawi and Abdul Aziz, Nuraini and Halali, Mohammad (2014) Investigation of thickness influences on energy absorption for side doors and B pillar in Euro NCAP Pole Side Impact Test. Applied Mechanics and Materials, 663. pp. 585-589. ISSN 1660-9336; ESSN: 1662-7482

Abdullah, Adibah and Inayatullah, Othman and Masuri, Siti Ujila and Abdul Aziz, Nuraini and Sahari, Barkawi and Jamaludin, Nordin (2014) Single-grade engine lubricant: introduce viscosity index numerical order (VIno). Applied Mechanics and Materials, 564. pp. 83-88. ISSN 1660-9336; ESSN: 1662-7482

Bahraminasab, Marjan and Sahari, Barkawi and Edwards, Kevin L. and Farahmand, Farzam and Tang, Sai Hong and Naghibi, Hamid (2013) Material tailoring of the femoral component in a total knee replacement to reduce the problem of aseptic loosening. Materials & Design, 52. pp. 441-451. ISSN 0261-3069

Shuib, Solehuddin and Sahari, Barkawi and Wong, Shaw Voon and Arumugam, Manohar and Kadarman, A Halim (2013) Stress analysis of femoral bone resorption with implant. CREAM - Current Research in Malaysia, 2 (2). pp. 23-41. ISSN 2231-8305; ESSN: 2289-5191

Bahraminasab, Marjan and Sahari, Barkawi and Edwards, Kevin L. and Farahmand, Farzam and Arumugam, Manohar (2013) Aseptic loosening of femoral components - materials engineering and design considerations. Materials & Design, 44. pp. 155-163. ISSN 0261-3069

Abdul Aziz, Faieza and Sahari, Barkawi and Abdul Aziz, Nuraini and Lilehkoohi, A. H. and Halali, M. (2013) Crashworthiness Determination for Front and Rear Doors and B Pillar Subjected to Side Impact Crash by a Mobile Deformable Barrier. Journal Advance Science Letters, 19 (2). pp. 392-395. ISSN 1936-6612

Abdul Aziz, Faieza and Sahari, Barkawi and Abdul Aziz, Nuraini and Lilehkoohi, A. H. and Halali, M. (2013) Effect of Material and Thickness of Side Doors And B Pillar on Crashworthiness in Euro NCAP Side Impact Crash Test. Journal Advance Science Letters, 19 (2). pp. 359-362. ISSN 1936-6612

Abdul Aziz, Faieza and Sahari, Barkawi and Abdul Aziz, Nuraini and Halali, M. (2013) Effect of Material on Crashworthiness for Side Doors and B Pillar Subjected to Euro NCAP Side Impact Crash Test. Journal Advance Science Letters, 19 (2). pp. 359-362. ISSN 1936-6612

Sichani, Mohammadmehdi Shahzamanian and Sahari, Barkawi and Bayat, Mehdi and Mustapha, Faizal and Zahari, Nur Ismarrubie (2013) Elastic contact analysis of functionally graded brake disks subjected to thermal and mechanical loads. International Journal for Computational Methods in Engineering Science and Mechanics, 14 (1). pp. 10-23. ISSN 1550-2287; ESSN: 1550-2295

Shuib, Solehuddin and Sahari, Barkawi and Wong, Shaw Voon and Arumugam, Manohar and Kadarman, Halim (2013) Stress analysis of femoral hip with bone resorption. Trends in Biomaterials and Artificial Organs, 27 (2). pp. 88-92. ISSN 0971-1198

Ng, Sok Choo and Ismail, Napsiah and Ali, Aidy and Sahari, Barkawi and Mohd Yusof, Juraina (2013) Ultrasonic NDE for internal defect detection in multi-layered composite materials by multi-resolution signal decomposition. Journal of Applied Sciences, 13 (1). pp. 87-94. ISSN 1812-5654

Bahraminasab, Marjan and Jahan, Ali and Sahari, Barkawi and Arumugam, Manohar and Shamsborhan, Mahmoud and Hassan, Mohd Roshdi (2013) Using design of experiments methods for assesing peak contact pressure to material properties of soft tissue in human knee. Journal of Medical Engineering, 2013. art. no. 891759. pp. 1-11. ISSN 2314-5129; ESSN: 2314-5137

Bahraminasab, Marjan and Jahan, Ali and Sahari, Barkawi and Arumugam, Manohar and Shamsborhan, Mahmoud and Hassan, Mohd Roshdi (2013) Using design of experiments methods for assessing peak contact pressure to material properties of soft tissue in human knee. Journal of Medical Engineering, 2013. art. no. 891759. pp. 1-11. ISSN 2314-5129; ESSN: 2314-5137

Jalaluddin, Mai Nursherida and Abdul Aziz, Nuraini and Sahari, Barkawi and Ali, Aidy and Abdul Aziz, Faieza and Tuan Ismail, Tuan Hafandi and Azizi, Azim and Mohd Salleh, Salwani and M. S., Nabilah and S. S., Aini and M., Shahril and M. H., Norhidayah (2012) Determination of leg injury criteria subjected to frontal impacts. Applied Mechanics and Materials, 165. pp. 265-269. ISSN 1660-9336; ESSN: 1662-7482

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2011) Modeling of residual stress relaxation of fatigue in 2024-T351 aluminium alloy. International Journal of Fatigue, 33 (2). pp. 279-285. ISSN 0142-1123

Hosseinabadi, Reza Afshar and Ali, Aidy and Sahari, Barkawi and Bayat, Mehdi (2011) Auto adjust masses of automotive structures with desired centre of gravity. Key Engineering Materials, 462-463. pp. 812-816. ISSN 1013-9826; ESSN: 1662-9795

Afshar, Reza and Ali, Aidy and Sahari, Barkawi and Bayat, Mehdi (2011) Axial crush of the tubular structure with various cee-shaped cross-sections. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012039. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi (2011) Characterization of shot peened 2024-T351 aluminum alloy. Key Engineering Materials, 462-463. pp. 912-917. ISSN 1013-9826; ESSN: 1662-9795

Bahraminasab, Marjan and Sahari, Barkawi and Hassan, Mohd Roshdi and Arumugam, Manohar and Shamsborhan, Mahmoud (2011) Finite element analysis of the effect of shape memory alloy on the stress distribution and contact pressure in total knee replacement. Trends in Biomaterials & Artificial Organs, 25 (3). pp. 95-100. ISSN 0971-1198

Mohammad, Khairul Azhar and Ali, Aidy and Oshkour, Azim Ataollahi and Sahari, Barkawi and Abdullah, Shahrum (2011) Investigation of creep fatigue crack propagation in aluminium tube. Key Engineering Materials, 462-463. pp. 541-546. ISSN 1013-9826; ESSN: 1662-9795

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2011) Micro-hardness and residual stress relaxation of 2024 T351 aluminum alloy. Key Engineering Materials, 462-463. pp. 343-348. ISSN 1013-9826; ESSN: 1662-9795

Eslamian, Saeed and Sahari, Barkawi and Ali, Aidy and Mahdi, Elsadig and Hamouda, Abdel Magid Salem (2011) Microscopic study of 5083-H321 aluminium alloy under fretting fatigue condition. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012026. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Jalaluddin, Mai Nursherida and Sahari, Barkawi and Abdul Aziz, Nuraini (2011) Parametric study of automotive composite bumper beams subjected to frontal impacts. Key Engineering Materials, 471-472. pp. 484-489. ISSN 1013-9826; ESSN: 1662-9795

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi (2011) Prediction of residual stress relaxation of shot peened 2024-T351 aluminum alloy: part 1. Key Engineering Materials, 462-463. pp. 1355-1360. ISSN 1013-9826; ESSN: 1662-9795

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi (2011) Prediction of residual stress relaxation of shot peened 2024-T351 aluminum alloy: part 2. Key Engineering Materials, 462-463. pp. 1349-1354. ISSN 1013-9826; ESSN: 1662-9795

Salit, Mohd Sapuan and Sahari, Barkawi and Abdalla, F. Hamed and Megat Ahmad, Megat Mohamad Hamdan (2011) Stress-strain distributions through the thickness of thick walled filament wound polymer composite tube under internal pressure loading. Journal of Polymer Materials, 28 (3). pp. 475-504. ISSN 0973-8622

Oshkour, Azim Ataollahi and Sahari, Barkawi and Ali, Aidy (2011) Variation of stress intensity factor through the thickness of plate. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012004. pp. 1-12. ISSN 1757-8981; ESSN: 1757-899X

M. M., Shahzamanian and Sahari, Barkawi and Bayat, Mehdi and Zahari, Nur Ismarrubie and Mustapha, Faizal (2010) Transient and thermal contact analysis for the elastic behavior of functionally graded brake disks due to mechanical and thermal loads. Materials and Design, 31 (10). pp. 4655-4665. ISSN 0264-1275

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2010) Residual stress relaxation and surface hardness of a 2024-t351 aluminium alloy. Materials Testing, 52 (9). pp. 632-639. ISSN 0025-5300

Ali, Aidy and Hosseini, Maryam and Sahari, Barkawi (2010) A review and comparison on some rubber elasticity models. Journal of Scientific and Industrial Research, 67 (7). pp. 495-500. ISSN 0022-4456; ESSN: 0975-1084

Sichani, Mohammadmehdi Shahzamanian and Sahari, Barkawi and Bayat, Mehdi and Mustapha, Faizal and Zahari, Nur Ismarrubie (2010) Finite element analysis of thermoelastic contact problem in functionally graded axisymmetric brake disks. Composite Structures, 92 (7). pp. 1591-1602. ISSN 0263-8223; ESSN: 1879-1085

Nasab, Marjan Bahrami and Hassan, Mohd Roshdi and Sahari, Barkawi (2010) Metallic biomaterials of knee and hip - a review. Trends in Biomaterials and Artificial Organs, 24 (2). pp. 69-82. ISSN 0971-1198

Ali, Aidy and Tun, Chun Yung and Zulkefli, Zamir Aimaduddin and Abd. Aziz, Nuraini and Sahari, Barkawi and Mohammadi, Mehdi Zadeh (2010) Strength investigation of thick welded T-Joint using finite element modelling. Defence Science Journal, 60 (1). pp. 112-118. ISSN 0011-748X; ESSN: 0976-464X

Ali, Aidy and Hosseini, Maryam and Sahari, Barkawi (2010) Continuum damage mechanics modeling for fatigue life of elastomeric materials. International Journal of Structural Integrity, 1 (1). pp. 63-72. ISSN 1757-9864

Bayat, Mehdi and Mohazzab, Amir Hossein and Sahari, Barkawi and Saleem, Mahdiyya (2010) Exact solution for functionally graded variable-thickness rotating disc with heat source. Journal of Mechanical Engineering Science, 224 (11). pp. 2316-2331. ISSN 0954-4062; ESSN: 2041-2983

Ali, Aidy and Fouladi, Mohammad Hosseini and Sahari, Barkawi (2010) A review of constitutive models for rubber-like materials. American Journal of Engineering and Applied Sciences, 3 (1). pp. 232-239. ISSN 1941-7020; ESSN: 1941-7039

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2009) Relaxation of compressive residual stress. Part 1: relaxation of stage I. Journal of Scientific and Industrial Research, 68 (12). pp. 1035-1037. ISSN 0022-4456; ESSN: 0975-1084

Bayat, Mehdi and Sahari, Barkawi and Saleem, Mahdiyya and Ali, Aidy and Wong, Shaw Voon (2009) Bending analysis of a functionally graded rotating disk based on the first order shear deformation theory. Applied Mathematical Modelling, 33 (11). pp. 4215-4230. ISSN 0307-904X; ESSN: 1872-8480

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2009) Modelling of residual stress relaxation : a review. Pertanika Journal of Science & Technology, 17 (2). pp. 325-336. ISSN 0128-7680; ESSN: 2231-8526

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2009) Modelling of residual stress relaxation: a review. Pertanika Journal of Science & Technology, 17 (2). pp. 211-218. ISSN 0128-7680; ESSN: 2231-8526

Bayat, Mehdi and Saleem, Muhammad and Sahari, Barkawi and Hamouda, Abdel Magid Salem and Mahdi, Elsadig (2009) Mechanical and thermal stresses in a functionally graded rotating disk with variable thickness due to radially symmetry loads. International Journal of Pressure Vessels and Piping, 86 (6). pp. 357-372. ISSN 0308-0161

Hosseinabadi, Reza Afshar and Ali, Aidy and Sahari, Barkawi (2009) Auto generation of the center of gravity of tubular structures during crush deformation. International Journal of Computational Methods, 6 (2). pp. 333-348. ISSN 0219-8762; ESSN: 1793-6969

Abdul Aziz, Nuraini and Sahari, Barkawi (2009) Performance of dual lips elastomeric seal for spigot-socket push fit joint using finite element method. European Journal of Scientific Research, 32 (1). pp. 67-77. ISSN 1450-216X; ESSN: 1450-202X

Abdullah, Luqman Chuah and Gimbun, Jolius and Ahmadun, Fakhru'l-Razi and Sahari, Barkawi and Choong, Thomas Shean Yaw (2009) Prediction of CO and NOx abatement in catalytic converter of a compressed natural gas vehicle (CNGV) cold-start engine. Journal of Nature Science and Sustainable Technology, 3 (3). pp. 195-210. ISSN 1933-0324

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2009) Relaxation of residual stress part 2: relaxation of stage 2. American Journal of Engineering and Applied Sciences, 2 (4). pp. 759-763. ISSN 1941-7020; ESSN: 1941-7039

Sahari, Barkawi and Abu Mansor, Siti Marhainis and Wong, Shaw Voon and Hamouda, Abdel Magid Salem and Ahmad, Mohd Fauzy and Abdul Rahman, Jasmi and Khalid, Yousif A. (2009) Static stiffness and stress distribution of gasoline and natural gas vehicle platforms subjected to torsion loads. European Journal of Scientific Research, 30 (2). pp. 272-281. ISSN 1450-216X; ESSN: 1450-202X

Hamed, Abdalla F. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Sahari, Barkawi (2009) Theoretical stress and strain distribution across thick - walled filament wound composite. Polimery, 54 (7-8). pp. 559-563. ISSN 0032-2725

Daghigh, Roonak and Adam, Nor Mariah and Sopian, Kamaruzzaman and Sahari, Barkawi (2009) Thermal comfort of an air-conditioned office through different windows-door opening arrangements. Building Services Engineering Research and Technology, 30 (1). pp. 49-63. ISSN 0143-6244; ESSN: 1477-0849

Bayat, Mehdi and Sahari, Barkawi and Saleem, Muhammad Azhar and Hamouda, Abdel Magid Salem and Reddy, Junuthula N. (2009) Thermo elastic analysis of functionally graded rotating disks with temperature-dependent material properties: uniform and variable thickness. International Journal of Mechanics and Materials in Design, 5 (3). pp. 263-279. ISSN 1569-1713; ESSN: 1573-8841

Bayat, Mehdi and Sahari, Barkawi and Saleem, Muhammad Azhar and Ali, Aidy and Wong, Shaw Voon (2009) Thermoelastic solution of a functionally graded variable thickness rotating disk with bending based on the first-order shear deformation theory. Thin-Walled Structures, 47 (5). pp. 568-582. ISSN 0263-8231

Zadeh, M. and Ali, Aidy and Golestaneh, Amirreza Fahim and Sahari, Barkawi (2009) Three dimensional simulation of fatigue crack growth in friction stir welded joints of 2024-T351 Al alloy. Journal of Scientific and Industrial Research, 68 (9). pp. 775-782. ISSN 0022-4456

Daghigh, Roonak and Adam, Nor Mariah and Sahari, Barkawi (2009) Ventilation Parameters and Thermal Comfort of Naturally and Mechanically Ventilated Offices. Indoor and Built Environment, 18 (2). pp. 113-122. ISSN 1420-326X

Abdalla, F. Hamed and Megat Ahmad, Megat Mohamad Hamdan and Salit, Mohd Sapuan and Sahari, Barkawi (2008) Determination of volume fraction values of filament wound glass and carbon fiber reinforced composites. Journal of Engineering and Applied Sciences, 3 (4). pp. 7-11. ISSN 1819-6608

Bayat, Mehdi and Saleem, Zaki Matte and Sahari, Barkawi and Salem Hamouda, Abdel Magid and Ahmed Saad, Elsadig Mahdi (2008) Analysis of functionally graded rotating disks with variable thickness. Mechanics Research Communications, 35 (5). pp. 283-309. ISSN 0093-6413

Bayat, Mehdi and Sahari, Barkawi and Salem Hamouda, Abdel Magid and Saleem, Zaki Matte and Ahmed Saad, Elsadig Mahdi (2008) On the Stress Analysis of Functionally Graded Gear Wheels with Variable Thickness. International Journal for Computational Methods in Engineering Science and Mechanics, 9 (2). pp. 121-137. ISSN 1550-2287

Hamed, Abdalla F. and Megat Ahmad, Megat Mohamad Hamdan and Sahari, Barkawi and Salit, Mohd Sapuan (2008) Experimental characterization of filament wound glass/epoxy and carbon/epoxy composite materials. ARPN Journal of Engineering and Applied Sciences, 3 (4). pp. 76-87. ISSN 1819-6608

Sahari, Barkawi and Azni, Muhammad Mujahid and Wong, Shaw Voon and Ahmad, Mohd Fauzy and Khalid, Yousif A. and Hamouda, Abdel Magid Salem (2008) Finite element lateral crash analysis of front natural gas vehicle platform with tank mounting structure. International Journal of Vehicle Safety, 3 (2). pp. 135-148. ISSN 1479-3105; ESSN: 1479-3113

Daghigh, Roonak and Adam, Nor Mariah and Sahari, Barkawi and Sopian, Kamaruzzaman and Alghoul, Mohammad Ahmed (2008) Influences of air exchange effectiveness and its rate on thermal comfort: naturally ventilated office. Journal of Building Physics, 32 (2). pp. 175-194. ISSN 1744-2591; ESSN: 1744-2583

Hamed, Abdalla F. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Sahari, Barkawi (2008) Internal pressure carrying capacity for different loading modes of filament-wound pipes from glass fiber-reinforced epoxy composites. Polymer-Plastics Technology and Engineering, 47 (8). pp. 802-808. ISSN 0360-2559; ESSN: 1525-6111

Hamed, Abdalla F. and Megat Ahmad, Megat Mohamad Hamdan and Salit, Mohd Sapuan and Sahari, Barkawi (2008) Theoretical analysis for calculation of the through thickness effective constants for orthotropic thick filament wound tubes. Polymer-Plastics Technology and Engineering, 47 (10). pp. 1008-1015. ISSN 0360-2559; ESSN: 1525-6111

Conference or Workshop Item

Mohd Salleh, Salwani and Sahari, Barkawi and Ali, Aidy and Hassan, Mas Ayu and Daud, Rosdi (2016) Correlations between axial and oblique loaded column. In: 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016), 21-23 Oct. 2016, Shanghai, China. (pp. 1-4).

Sahari, Barkawi and Arsad, N. M. and Hamouda, Abdel Magid Salem and Wong, Shaw Voon and Ahmad, M. F. (2008) The Effect of Ribs on Behavior of Natural Gas Vehicle Platform Backbone with Stamping Consideration. In: 13th International Conference on Applied Mechanics and Mechanical Engineering., 27-29 May, 2008, Military Technical College Kobry El-Kobbah, Cairo, Egypt.. (pp. 67-78).

Lai, Jian Ming and Abdul Aziz, Faieza and Sahari, Barkawi (2008) A study on real-time auditory feedback technique in manipulation task. In: 3rd International Symposium on Information Technology (ITSim'08), 26-28 Aug. 2008, Kuala Lumpur, Malaysia. .

Tarlochan, Faris and Hamouda, Abdel Magid Salem and Sahari, Barkawi and Saad, Elsadig Mahdi Ahmed (2005) Edgewise compression of composite sandwich panels: effect of core hybridization. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. (pp. 9-16).

Abdul Aziz, Nuraini and Sahari, Barkawi and A. Khalid, Yousif and Idris, Azni (2001) Finite element analysis of elastomeric push-fit spigot and socket steel pipe joint. In: Persidangan Kebangsaan Penyelidikan & Pembangunan IPTA 2001, 25-26 Okt. 2001, Universiti Kebangsaan Malaysia, Bangi, Selangor. (pp. 615-623).

Sahari, Barkawi and A. Khalid, Yousif and M. Ahmed, Elsadig and Abdul Aziz, Nuraini (2000) Numerical modelling intensive advanced technology-current and future scenario. In: Proceeding of Advanced Technology Forum Frontiers of Knowledge for Industrial Excellence, 7-8 Nov. 2000, Shah Alam, Selangor. (pp. 31-143).

Sahari, Barkawi and Che Muda, Zakaria (1988) The future of finite element technology - the challenge ahead. In: International Seminar and Exhibition "Computerisation for Development - The Research Challenge", 16-18 Aug. 1988, PWTC, Kuala Lumpur. .

Inaugural Lecture

Sahari, Barkawi (2009) Materials, energy and CNGDI vehicle engineering. [Inaugural Lecture]

Monograph

Sahari, Barkawi and Idris, Azni and Khalid, Yousif A. and Abdul Aziz, Nuraini and Abdul Aziz, Faeiza (2002) Finite element prediction and failure analysis of integral elastomeric spigot and socket joints for steel pipes. Research Report. Research Management Centre, Serdang, Selangor.

Patent

Barkawi Sahari (2012) A lightweight rear bumper with crash worthy compartment. PI2012700830.

Barkawi Sahari (2011) Wobble plate compressor. UNSPECIFIED.

Barkawi Sahari (2010) Compressed natural gas fuel injection system and method. UNSPECIFIED.

Barkawi Sahari (2009) Front floor natural gas vehicle platform. UNSPECIFIED.

Barkawi Sahari (2009) Mounting bracket. UNSPECIFIED.

Barkawi Sahari (2009) Rear floor natural gas vehicle platform. UNSPECIFIED.

Barkawi Sahari (2008) Direct injection of compressed natural gas (CNG) fuel for reciprocating piston internal combustion engine. UNSPECIFIED.

Barkawi Sahari (2006) Led-based schlieren mirror system. UNSPECIFIED.

Barkawi Sahari (2006) Nozzle and seat geometry for direct injection. UNSPECIFIED.

Barkawi Sahari (2005) Method for controlling multiple-injection of gaseous fuel in a direct injection engine. UNSPECIFIED.

Barkawi Sahari (2005) Method and system for calibration of mass flow measurement for volumetric flow measurement device. UNSPECIFIED.

Barkawi Sahari (2005) Tank mounting structure. UNSPECIFIED.

Barkawi Sahari (2005) Backbone structure of front vehicle. UNSPECIFIED.

Barkawi Sahari (2005) Body structure for natural gas vehicles. UNSPECIFIED.

Barkawi Sahari (2005) Test method and optimisation of ignition system parameters inside CNG-DI engine. UNSPECIFIED.

This list was generated on Thu Mar 28 20:50:17 2024 +08.