UPM Institutional Repository

Quantitative evaluation of geometric and dimensional error of cold forged AUV propeller blade


Citation

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin and Tandur, Khaleed Hussain and Abdul Aziz, Nuraini (2011) Quantitative evaluation of geometric and dimensional error of cold forged AUV propeller blade. Australian Journal of Basic and Applied Sciences, 5 (9). pp. 1756-1764. ISSN 1991-8178

Abstract

Accuracy is the key issue in the precision forging. Geometric error is one of the major errors found in cold forging part. The error becomes more critical as the complexity of part increase. In this study, geometric and dimensional error of an Autonomous Underwater Vehicle (AUV) propeller blade is quantified by comparing the profiles obtained from optical method. The profile of the forged blade is consider as the final part, while the profile obtained from the punch is consider as the targeted profile. Two geometric parameters were evaluated in this study i.e. the twist angle and the blade thickness. The CMM was used to validate the methodology. The result shows that the thickness error depends on deformation ratio, while the twist angle accuracy rely on amount of twist and thickness of the blade.


Download File

[img]
Preview
PDF (Abstract)
Quantitative evaluation of geometric and dimensional error of cold forged AUV propeller blade.pdf

Download (35kB) | Preview
Official URL or Download Paper: http://ajbasweb.com/old/Ajbas_september_2011.html

Additional Metadata

Item Type: Article
Divisions: Faculty of Engineering
Publisher: American-Eurasian Network for Scientific Information
Keywords: Cold forging; Deformation ratio; Geometric error; Twist angle
Depositing User: Nabilah Mustapa
Date Deposited: 07 Dec 2015 03:57
Last Modified: 07 Dec 2015 03:57
URI: http://psasir.upm.edu.my/id/eprint/23132
Statistic Details: View Download Statistic

Actions (login required)

View Item View Item